Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.
WIND FAIRING FOR RACK / 1475MM(W) – BY FRONT RUNNER
• Get a bold new overlanding look in minutes.
• Create a solid appearance by covering the gap from roof to rack.
• Air flows easily over the rack and accessories, reducing drag and wind noise.
• Helps fuel consumption while carrying bulky loads.
• Easily secures to your roof rack in three simple steps.
• Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
• A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
• An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: May interfere with sunroof operation on some vehicles.
VIDEOS:
Additional information
Additional information
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H
Weight:
1.5kg (3.3lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner Wind Fairing for Rack 1475mm(w)” Cancel reply
Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack. These plates can also be used to mount a Front Runner Slimline II Roof Rack Tray to Thule slotted Load Bars.
Replacements for lost or damaged Slimline II assembly components.
Content
WIND FAIRING FOR RACK / 1475MM(W) - BY FRONT RUNNER
• Get a bold new overlanding look in minutes.
• Create a solid appearance by covering the gap from roof to rack.
• Air flows easily over the rack and accessories, reducing drag and wind noise.
• Helps fuel consumption while carrying bulky loads.
• Easily secures to your roof rack in three simple steps.
• Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
• A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
• An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: May interfere with sunroof operation on some vehicles.
VIDEOS:
ARB CANOPY ROOF RACKS AND BARS
An ARB canopy roof rack is perfect for carrying timber, ladders and a variety of other equipment. Available in two sizes for dual cab vehicles, both steel and aluminium models are available, incorporating an aerodynamic, durable design. Featuring an open ended design to aid loading, an optional roof rack roller can also be selected (steel racks only) to assist with loading longer items.
ARB’s canopy roof bar systems utilise Thule or Rhino roof bars, supported by an internal steel frame. This ensures that the vehicle, not the canopy, is supporting the load. Both of these roof bar brands offer a massive selection of trade and recreational accessories, making this an extremely versatile system for carrying a wide variety of loads.
Please note: Not all ARB roof rack options listed below may be suitable to be fitted to your vehicle. For help with selecting the right roof rack for your needs, please speak to your local ARB store/stockist.
DESIGNED AND ENGINEERED FOR OFF ROAD USE
All ARB roof racks and mounting kits are designed and engineered for off road use and are rated and tested inline with the roof load limit of each individual vehicle. This means you can be assured that, no matter where you go, your ARB roof rack is up to the task!
1475MM SLAT ADD-ON KIT - BY FRONT RUNNER
• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
• Includes Additional Tray Slat Bolts secure extra slat to your Slimline II Rack Tray.
• This slat will work with any Front Runner Slimline II Rack that is 1475mm wide.
• Can also be used to build a custom Load Bar Kit, or as a replacement slat.
• Features T-slots on both the top and bottom faces.
• A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
• Made from the same black powder coated aluminum as all Front Runner Racks.
NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately.
VIDEOS:
RACK ADAPTOR PLATES FOR THULE SLOTTED LOAD BARS - BY FRONT RUNNER
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
If you currently own Thule Load Bars on your vehicle, you can also use these adapter plates to mount a Front Runner Slimline II Roof Rack Tray to your load bars.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
• 3CR12 stainless steel.
• Black powder coated.
• Mounts onto individual slats via the T-slot system.
• T-slot bolts included.
• Pre-cut fitment holes.
VIDEOS:
STEEL CAB RACKS
A shorter design that fits comfortably on the roof of a dual cab ute, ARB’s cab racks provide additional storage space for these vehicles.
- Manufactured from strong, tubular steel to the same high standards as our deluxe steel roof racks
- Provides up to 75kg of carrying capacity
- Structurally mounted to the roof with either zinc die cast mounting bases or mount rails
- Stainless steel mounting fasteners
- Incorporates front air deflector to reduce wind noise
- Trade and deluxe styles available
4 PIECE TOOL KIT - BY FRONT RUNNER
The Front Runner 4 piece tool kit is all you need for moving around rack accessories, reconfiguring Slimline II Roof Rack slats, and general Front Runner accessory adjustments. This high quality kit is compact and can be stored within easy reach.
Includes the following:
• 1 x 5mm Ball type Hex Key
• 1 x 4mm Ball type Hex Key
• 1 x 10mm Ratchet Wrench Tool
• 1 x 13mm Ratchet Wrench Tool
VIDEOS:
Weight
N/A
N/A
N/A
N/A
N/A
N/A
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H
Weight:
1.5kg (3.3lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consisting of:
1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1475 – Standard Slat- 1475mm Wide Rack
Approximate Installed Weight 2kg (5lbs)
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2016 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") 3CR12 stainless steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 285mm (11.22") x W 205mm (8.07") x H 55mm (2.16")
Weight:
2kg (4.4lbs)
Consists of:
1 x 5mm Ball End Hex Key
1 x 4mm Ball End Hex Key
1 x 10mm Ratchet Wrench
1 x 13mm Ratchet Wrench
Reviews
There are no reviews yet.