In Stock

Front Runner Wind Fairing for Rack 1165mm/1255mm(w)

$183

Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.

SKU: RRAC143 Categories: , , , , , , , , , , Tags: , , ,

Description

WIND FAIRING FOR RACK / 1165MM/1255MM(W) – BY FRONT RUNNER

• Get a bold new overlanding look in minutes.
• Create a solid appearance by covering the gap from roof to rack.
• Air flows easily over the rack and accessories, reducing drag and wind noise.
• Helps fuel consumption while carrying bulky loads.
• Easily secures to your roof rack in three simple steps.
• Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
• A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
• An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.

Note: May interfere with sunroof operation on some vehicles.

VIDEOS:

Additional information

Consists of:

1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:

Black powder coated aluminum
EPDM Rubber
Product Dimensions:

1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:

1.1kg (2.4lbs)
Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 110 4DR Pick Up
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up

Reviews

There are no reviews yet.

Be the first to review “Front Runner Wind Fairing for Rack 1165mm/1255mm(w)”

Quick Comparison

SettingsFront Runner Wind Fairing for Rack 1165mm/1255mm(w) removeFront Runner Expedition Rail Kit - Full Perimeter for 1255mm(w) Rack removeFront Runner 1255mm Slat Add-on Kit removeFront Runner Rivnut Tool M6/M8 removeFront Runner 1345mm Slat Add-on Kit removeFront Runner Expedition Rail Kit - Front or Back for 1165mm(w) Rack remove
NameFront Runner Wind Fairing for Rack 1165mm/1255mm(w) removeFront Runner Expedition Rail Kit - Full Perimeter for 1255mm(w) Rack removeFront Runner 1255mm Slat Add-on Kit removeFront Runner Rivnut Tool M6/M8 removeFront Runner 1345mm Slat Add-on Kit removeFront Runner Expedition Rail Kit - Front or Back for 1165mm(w) Rack remove
Image
SKURRAC143KRXD002RRSAD1255VACC016RRSAG1345KRXA001
Rating
Price$183$395$85$23$89$129
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionMake a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1255mm wide Front Runner Slimline II Roof Rack.More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.Use this tool to insert M6 and M8 rivnuts.More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1165mm wide Front Runner Slimline II Roof Rack.
Content

WIND FAIRING FOR RACK / 1165MM/1255MM(W) - BY FRONT RUNNER

• Get a bold new overlanding look in minutes. • Create a solid appearance by covering the gap from roof to rack. • Air flows easily over the rack and accessories, reducing drag and wind noise. • Helps fuel consumption while carrying bulky loads. • Easily secures to your roof rack in three simple steps. • Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle. • A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. • An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust. Note: May interfere with sunroof operation on some vehicles. VIDEOS:

EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1255MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1255mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!! PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information. VIDEOS:

1255MM SLAT ADD-ON KIT - BY FRONT RUNNER

• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points. • Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray. • This slat will work with any Front Runner Slimline II Rack that is 1255mm wide. • Can also be used to build a custom Load Bar Kit, or as a replacement slat. • Features T-slots on both the top and bottom faces. • A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment. • Made from the same black powder coated aluminum as all Front Runner Racks. NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately. VIDEOS:

RIVNUT TOOL / M6/M8 - BY FRONT RUNNER

- Use this tool to insert M6 and M8 rivnuts. VIDEOS:

1345MM SLAT ADD-ON KIT - BY FRONT RUNNER

• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points. • Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray. • This slat will work with any Front Runner Slimline II Rack that is 1345mm wide. • Can also be used to build a custom Load Bar Kit, or as a replacement slat. • Features T-slots on both the top and bottom faces. • A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment. • Made from the same black powder coated aluminum as all Front Runner Racks. NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately. VIDEOS:

EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1165MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1165mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits. To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit Videos:
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Consists of:

1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:

Black powder coated aluminum
EPDM Rubber
Product Dimensions:

1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:

1.1kg (2.4lbs)
Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 110 4DR Pick Up
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:

2x RRAC066 – Expedition Tubing D (525.5mm and 365.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Materials used:

Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing
Product Dimensions:

Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1255mm (49.4") W x 112mm (4.4") H
Weight:

7.62kg (16.8lbs)
Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consisting of:

1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1255 – Standard Slat- 1255mm Wide Rack
Approximate Installed Weight 2kg (4lbs)
Shipping Dimensions:

Width 110mm (4")
Length 1260mm (50")
Height 70mm (3")
Shipping Weight:

Weight 2.2kg (4.8lbs)
Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014 Land Rover Defender 130 2DR Pick Up
Consisting of:

1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1345 – Standard Slat- 1345mm Wide Rack
Approximate Installed Weight 2kg (4lbs)
Shipping Dimensions:

Width 110mm (4")
Length 1350mm (53")
Height 70mm (3")
Shipping Weight:

Weight 2.3kg (5.0lbs)
Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:

RRAC065 – Expedition Tubing A (480.5mm & 365.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
Materials used:

Powder coated Aluminium die cast joints.
Powder coated 304 Stainless Steel tubing
Product Dimensions:

485mm (19.1") L x 1165mm (45.9") W x 112mm (4.4") H
Weight:

2.36kg (5.2lbs)
Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 110 4DR Pick Up
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Related products