In Stock

Front Runner Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1762mm(L)

$1,389

This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1″ (W) x 1762mm/69.4″ (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.

This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.

NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.

Description

TRUCK CANOPY OR TRAILER WITH OEM TRACK SLIMLINE II RACK KIT / TALL / 1425MM(W) X 1762MM(L) – BY FRONT RUNNER

• These kits include the rack tray, wind deflector, track and feet – everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*

VIDEOS:

Additional information

Consisting of:

3 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTJ09 – Slimline II Tray – 1425mm(W) X 1762mm(L) – by Front Runner

Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight:

27kg (60lbs)

Shipping Dimensions:

Width 1425mm (56")
Length 1762mm (69")
Height 70mm (3")

Shipping Weight:

Weight 31.6kg (69.5lbs)

Fitment:

– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon

Reviews

There are no reviews yet.

Be the first to review “Front Runner Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1762mm(L)”

Quick Comparison

SettingsFront Runner Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1762mm(L) removeFront Runner Expedition Rail Kit - Front or Back for 1345mm(w) Rack removeFront Runner Rack Adaptor Plates for Thule Slotted Load Bars removeFront Runner Slat to Load Bar Conversion End Cap Kit removeFront Runner Universal Track Non Drilled 1800mm(l) removeFront Runner Expedition Rail Kit - Full Perimeter for 1425mm(w) Rack remove
NameFront Runner Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1762mm(L) removeFront Runner Expedition Rail Kit - Front or Back for 1345mm(w) Rack removeFront Runner Rack Adaptor Plates for Thule Slotted Load Bars removeFront Runner Slat to Load Bar Conversion End Cap Kit removeFront Runner Universal Track Non Drilled 1800mm(l) removeFront Runner Expedition Rail Kit - Full Perimeter for 1425mm(w) Rack remove
Image
SKUKRCAT57TNKRXG001RRAC017RRAC044TRAC010KRXJ002
Rating
Price$1,389$139$90$20$200$425
Stock
Availability
Add to cart

DescriptionThis Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1762mm/69.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1345mm wide Front Runner Slimline II Roof Rack.These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack. These plates can also be used to mount a Front Runner Slimline II Roof Rack Tray to Thule slotted Load Bars.Convert any size slat to a load bar with these plastic end caps.Mount Front Runner roof rack feet into this smart and strong universal track.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1425mm wide Front Runner Slimline II Roof Rack.
Content

TRUCK CANOPY OR TRAILER WITH OEM TRACK SLIMLINE II RACK KIT / TALL / 1425MM(W) X 1762MM(L) - BY FRONT RUNNER

• These kits include the rack tray, wind deflector, track and feet - everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers. • The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack. • All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. • All Front Runner Racks are backed by a Limited Lifetime Warranty* VIDEOS:

EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1345MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits. To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit. VIDEOS:

RACK ADAPTOR PLATES FOR THULE SLOTTED LOAD BARS - BY FRONT RUNNER

These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack. If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack. If you currently own Thule Load Bars on your vehicle, you can also use these adapter plates to mount a Front Runner Slimline II Roof Rack Tray to your load bars. Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.) • 3CR12 stainless steel. • Black powder coated. • Mounts onto individual slats via the T-slot system. • T-slot bolts included. • Pre-cut fitment holes. VIDEOS:

SLAT TO LOAD BAR CONVERSION END CAP KIT - BY FRONT RUNNER

• Convert any size slat to a load bar with these plastic end caps. • Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat. • Just pop them on and your slat to load bar "conversion" is complete! • Supplied in sets of (4) four. Consists of: • 4x Load Bar End-caps Material used: • Plastic - Polypropylene Product Dimensions: • 91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H Weight: • 80g (2.8oz) VIDEOS:

UNIVERSAL TRACK NON DRILLED / 1800MM(L) - BY FRONT RUNNER

The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot. • Suitable for universal fitment of a roof rack should the vehicle roof allow. • Often used for trailers and canopies to mount a rack or load bars. • Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track. • Powder coated black. • Comes in pairs. VIDEOS:

EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1425MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1425mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!! PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information. VIDEOS:
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Consisting of:

3 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTJ09 – Slimline II Tray – 1425mm(W) X 1762mm(L) – by Front Runner

Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight:

27kg (60lbs)

Shipping Dimensions:

Width 1425mm (56")
Length 1762mm (69")
Height 70mm (3")

Shipping Weight:

Weight 31.6kg (69.5lbs)

Fitment:

– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon

Consists of:

RRAC067 – Expedition Tubing G (570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner

Materials used:

Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing

Product Dimensions:

690mm (27.2") L x 1345mm (53") W x 112mm (4.4") H

Weight:

2.74kg (6lbs)

Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Works with:

Both the SLOTTED SQUARE and AERO Thule Load Bars.

Materials used:

2.5mm (0.098") 3CR12 stainless steel, supplied with mountings for Aero and Square Bar

Consists of:

4 x Thule Load Bar adaptors and a nuts and bolts kit

Product Dimensions:

L 285mm (11.22") x W 205mm (8.07") x H 55mm (2.16")

Weight:

2kg (4.4lbs)

Consists of:

1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide

Materials used:

Black powder coated aluminum
Rubber

Product Dimensions:

1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H

Weight:

2.6kg (5.7lbs)

Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Consists of:

2x RRAC068 – Expedition Tubing J (610.5mm and 570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit

Materials used:

Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing

Product Dimensions:

Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1425mm (56.1") W x 112mm (4.4") H

Weight:

8.46kg (18.6lbs)

Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014 Land Rover Defender 110 5dr Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up