Front Runner Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1255mm(W) X 2368mm(L)
$1,872
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4″ (W) x 2368mm/93.2″ (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.
See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
TRUCK CANOPY OR TRAILER SLIMLINE II RACK KIT / TALL / 1255MM(W) X 2368MM(L) – BY FRONT RUNNER
• These kits include the rack tray, wind deflector, track and feet – everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. – Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
Additional information
Additional information
Consisting of:
4 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTD12 – Slimline II Tray – 1255mm(W) X 2368mm(L) – by Front Runner
2 x TRCA003 – Canopy Tracks / 1150mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
– 2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1255mm(W) X 2368mm(L)” Cancel reply
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4" (W) x 2368mm/93.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.
See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next to a joiner.
These brackets can also be used to position a Front Runner Single Jerry Can holder between slats, parallel to the slats.
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1425mm wide Front Runner Slimline II Roof Rack.
This rubber beading fits into your Front Runner Roof Rack t-slots to create a perfect rattle free and non-slip surface. Sold in 1.5m/5' lengths.
Content
TRUCK CANOPY OR TRAILER SLIMLINE II RACK KIT / TALL / 1255MM(W) X 2368MM(L) - BY FRONT RUNNER
• These kits include the rack tray, wind deflector, track and feet - everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. - Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
INTER-SLAT BRACKETS - BY FRONT RUNNER
For additional information, see the Installation Instructions in the INSTALLATION TAB to determine if you need this product when adding additional slats to your Slimline II roof rack.
**If building a solid platform on your Slimline II and you need these brackets, note that the slats used in conjunction with the bracket will need to be ONE SIZE SMALLER than the slats used in your rack.
FOR USE WITH THE SINGLE JERRY CAN HOLDER:
The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you'd like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets.
VIDEOS:
1345MM SLAT ADD-ON KIT - BY FRONT RUNNER
• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
• Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
• This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
• Can also be used to build a custom Load Bar Kit, or as a replacement slat.
• Features T-slots on both the top and bottom faces.
• A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
• Made from the same black powder coated aluminum as all Front Runner Racks.
NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately.
VIDEOS:
ADDITIONAL TRAY SLAT BOLTS - BY FRONT RUNNER
- So you're adding slats onto your rack? Use these additional tray slat bolts to fasten them. Sold in pairs.
Consists of:
• 2x M8x25 Button Heads
VIDEOS:
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1425MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1425mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit.
VIDEOS:
T-SLOT RUBBER BEADING - BY FRONT RUNNER
Need a little extra insulation between your rack and gear?
The Front Runner T-Slot Rubber Beading slides easily into your Front Runner rack t-slots for extra grip and cushioning. It reduces rattles and is great for storage boxes, firewood, or any other item that you want to insulate from your rack. Comes in 1.5m (5') lengths.
On some vehicles with sun roofs, installing the t-slot beading on the front slats may help lessen wind noise.
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consisting of:
4 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTD12 – Slimline II Tray – 1255mm(W) X 2368mm(L) – by Front Runner
2 x TRCA003 – Canopy Tracks / 1150mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
– 2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
Consists of:
2 x Inter-Slat Brackets
2 x Slat End Caps
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated 3CR12 stainless steel
Product Dimensions:
227mm (8.9") L x 120mm (4.7") W x 25mm (1") H
Weight:
1.2kg (2.7lbs)
Consisting of:
1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1345 – Standard Slat- 1345mm Wide Rack
Approximate Installed Weight 2kg (4lbs)
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
RRAC068 – Expedition Tubing J (610.5mm and 570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
690mm (27.2") L x 1425mm (56.1") W x 112mm (4.4") H
Weight:
2.84kg (6.3lbs)
Fitment:
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1.5m (5') Length of beading
Materials used:
Ethylene propylene diene monomer (M-class) all weather rubber
Reviews
There are no reviews yet.