This Trail Tumbler lets you carry the warmth of nature from the trail to the office. The double-walled 350ml / 11.8 oz tumbler keeps your cold drinks cold and hot drinks hot. The no-spill, slide-lock top makes one-handed drinking easy and fits into most cup holders, making it your favorite mug for off-road coffee sipping.
From the concrete jungle to the trailhead, the rugged black powder coated stainless steel Trail Tumbler keeps nature in your hands and your drinks the perfect temperature.
• Strong and durable stainless steel construction
• Double-walled to keep your beverage of choice the perfect temperature
• At home no matter whether on the trail, in the office or on the beach
• Hassle-free top lets you easily fill and clean
• Wide spout for smooth drinking
• The no-spill, deeply recessed, silicon sealed top keeps the drink in the cup and not on your shirt
• Save money with no more disposable cups or chipped ceramic mugs
• Corrosive and puncture-resistant for the toughest trails
• Safe Food Grade stainless steel and plastic
• Holds 350ml / 11.8 oz
• BPA free
Care:
• Rinse and wash before using.
• Hand wash with mild soap.
Additional information
Additional information
Consists of:
1 x Trail Tumbler
Materials used:
Black powder coated double stainless steel
Food-grade plastic lid
This Trail Tumbler lets you carry the warmth of nature from the trail to the office. The double-walled 350ml / 11.8 oz tumbler keeps your cold drinks cold and hot drinks hot. The no-spill, slide-lock top makes one-handed drinking easy and fits into most cup holders, making it your favorite mug for off-road coffee sipping.
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1345mm wide Front Runner Slimline II Roof Rack.
If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next to a joiner.
These brackets can also be used to position a Front Runner Single Jerry Can holder between slats, parallel to the slats.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1425mm wide Front Runner Slimline II Roof Rack.
These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack. These plates can also be used to mount a Front Runner Slimline II Roof Rack Tray to Thule slotted Load Bars.
Content
TRAIL TUMBLER - BY FRONT RUNNER
From the concrete jungle to the trailhead, the rugged black powder coated stainless steel Trail Tumbler keeps nature in your hands and your drinks the perfect temperature.
• Strong and durable stainless steel construction
• Double-walled to keep your beverage of choice the perfect temperature
• At home no matter whether on the trail, in the office or on the beach
• Hassle-free top lets you easily fill and clean
• Wide spout for smooth drinking
• The no-spill, deeply recessed, silicon sealed top keeps the drink in the cup and not on your shirt
• Save money with no more disposable cups or chipped ceramic mugs
• Corrosive and puncture-resistant for the toughest trails
• Safe Food Grade stainless steel and plastic
• Holds 350ml / 11.8 oz
• BPA free
Care:
• Rinse and wash before using.
• Hand wash with mild soap.
1345MM SLAT ADD-ON KIT - BY FRONT RUNNER
• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
• Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
• This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
• Can also be used to build a custom Load Bar Kit, or as a replacement slat.
• Features T-slots on both the top and bottom faces.
• A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
• Made from the same black powder coated aluminum as all Front Runner Racks.
NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately.
VIDEOS:
EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1345MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!
PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
VIDEOS:
INTER-SLAT BRACKETS - BY FRONT RUNNER
For additional information, see the Installation Instructions in the INSTALLATION TAB to determine if you need this product when adding additional slats to your Slimline II roof rack.
**If building a solid platform on your Slimline II and you need these brackets, note that the slats used in conjunction with the bracket will need to be ONE SIZE SMALLER than the slats used in your rack.
FOR USE WITH THE SINGLE JERRY CAN HOLDER:
The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you'd like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets.
VIDEOS:
EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1425MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1425mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!
PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
VIDEOS:
RACK ADAPTOR PLATES FOR THULE SLOTTED LOAD BARS - BY FRONT RUNNER
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
If you currently own Thule Load Bars on your vehicle, you can also use these adapter plates to mount a Front Runner Slimline II Roof Rack Tray to your load bars.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
• 3CR12 stainless steel.
• Black powder coated.
• Mounts onto individual slats via the T-slot system.
• T-slot bolts included.
• Pre-cut fitment holes.
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Trail Tumbler
Materials used:
Black powder coated double stainless steel
Food-grade plastic lid
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
2x RRAC067 – Expedition Tubing G (570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1345mm (53") W x 112mm (4.4") H
Weight:
8.26kg (18lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
2 x Inter-Slat Brackets
2 x Slat End Caps
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated 3CR12 stainless steel
Product Dimensions:
227mm (8.9") L x 120mm (4.7") W x 25mm (1") H
Weight:
1.2kg (2.7lbs)
Consists of:
2x RRAC068 – Expedition Tubing J (610.5mm and 570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1425mm (56.1") W x 112mm (4.4") H
Weight:
8.46kg (18.6lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014 Land Rover Defender 110 5dr Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") 3CR12 stainless steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 285mm (11.22") x W 205mm (8.07") x H 55mm (2.16")
Reviews
There are no reviews yet.