Make storing and organizing gear and valuables a no-brainer. This lockable drawer can be fitted in many vehicles as a “universal” drawer solution. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle. Engineered tough for both on and off-road travel. Product Dimensions: 620mm (24.4″) L x 830mm (32.7″) W x 270mm (10.6″) H
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.
Includes turnbuckles and carabiners to facilitate installation to many vehicle factory mounting points.
• 113kg / 250 lb per drawer load carrying capacity.
• Hold open feature: drawer “locks” open while parked on uneven surfaces.
• High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
• Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
• The flat deck incorporates two cargo attachment channels and 4 Tie Down Rings For Drawer System.
• Customize your own storage configurations. Stack and secure luggage, Wolf Pack, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
• The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides.
• The deck is covered with a durable, UV resistant nylon pile carpet.
• The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
• Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
• All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: This “universal” drawer does not come with a vehicle specific deck completion set or faceplates.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Additional information
Additional information
Consists of:
1 x Drawer unit with 1 drawer
1 x Push to close latch with 2 keys
2 x Accessory channels
4 x Eye Nuts for accessory channel
Installation Hardware includes 4 turnbuckles to secure the unit
Fitting Instruction
Materials used:
Aluminum – Accessory Channels & Sub Frame
Black powder coated steel – Drawer Bin & Frame
Carpet & Laminated plywood – Top Deck
Product Dimensions:
620mm (24.4") L x 830mm (32.7") W x 270mm (10.6") H
Interior Drawer Dimensions:
497mm (19.6") L x 716mm (28.2") W x 180mm (7.1") H
Weight:
32.4Kg (71.4lbs)
Load Rating:
113Kg (250lbs)
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner SUV Drawer Small” Cancel reply
Make storing and organizing gear and valuables a no-brainer. This lockable drawer can be fitted in many vehicles as a “universal” drawer solution. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle. Engineered tough for both on and off-road travel. Product Dimensions: 620mm (24.4") L x 830mm (32.7") W x 270mm (10.6") H
If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next to a joiner.
These brackets can also be used to position a Front Runner Single Jerry Can holder between slats, parallel to the slats.
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender Pickup contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1425mm wide Front Runner Slimline II Roof Rack.
Convert any size slat to a load bar with these plastic end caps.
Content
SUV DRAWER / SMALL - BY FRONT RUNNER
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.
Includes turnbuckles and carabiners to facilitate installation to many vehicle factory mounting points.
• 113kg / 250 lb per drawer load carrying capacity.
• Hold open feature: drawer “locks” open while parked on uneven surfaces.
• High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
• Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
• The flat deck incorporates two cargo attachment channels and 4 Tie Down Rings For Drawer System.
• Customize your own storage configurations. Stack and secure luggage, Wolf Pack, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
• The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides.
• The deck is covered with a durable, UV resistant nylon pile carpet.
• The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
• Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
• All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: This "universal” drawer does not come with a vehicle specific deck completion set or faceplates.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
INTER-SLAT BRACKETS - BY FRONT RUNNER
For additional information, see the Installation Instructions in the INSTALLATION TAB to determine if you need this product when adding additional slats to your Slimline II roof rack.
**If building a solid platform on your Slimline II and you need these brackets, note that the slats used in conjunction with the bracket will need to be ONE SIZE SMALLER than the slats used in your rack.
FOR USE WITH THE SINGLE JERRY CAN HOLDER:
The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you'd like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets.
VIDEOS:
1345MM SLAT ADD-ON KIT - BY FRONT RUNNER
• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
• Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
• This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
• Can also be used to build a custom Load Bar Kit, or as a replacement slat.
• Features T-slots on both the top and bottom faces.
• A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
• Made from the same black powder coated aluminum as all Front Runner Racks.
NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately.
VIDEOS:
LAND ROVER DEFENDER (1983-2016) PICKUP TRUCK SLIMLINE II ROOF RACK KIT - BY FRONT RUNNER
• This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender Pickup contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
Videos:
EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1425MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1425mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!
PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
VIDEOS:
SLAT TO LOAD BAR CONVERSION END CAP KIT - BY FRONT RUNNER
• Convert any size slat to a load bar with these plastic end caps.
• Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
• Just pop them on and your slat to load bar "conversion" is complete!
• Supplied in sets of (4) four.
Consists of:
• 4x Load Bar End-caps
Material used:
• Plastic - Polypropylene
Product Dimensions:
• 91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
• 80g (2.8oz)
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Drawer unit with 1 drawer
1 x Push to close latch with 2 keys
2 x Accessory channels
4 x Eye Nuts for accessory channel
Installation Hardware includes 4 turnbuckles to secure the unit
Fitting Instruction
Materials used:
Aluminum – Accessory Channels & Sub Frame
Black powder coated steel – Drawer Bin & Frame
Carpet & Laminated plywood – Top Deck
Product Dimensions:
620mm (24.4") L x 830mm (32.7") W x 270mm (10.6") H
Interior Drawer Dimensions:
497mm (19.6") L x 716mm (28.2") W x 180mm (7.1") H
Weight:
32.4Kg (71.4lbs)
Load Rating:
113Kg (250lbs)
Consists of:
2 x Inter-Slat Brackets
2 x Slat End Caps
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated 3CR12 stainless steel
Product Dimensions:
227mm (8.9") L x 120mm (4.7") W x 25mm (1") H
Weight:
1.2kg (2.7lbs)
Consisting of:
1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1345 – Standard Slat- 1345mm Wide Rack
Approximate Installed Weight 2kg (4lbs)
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consisting of:
2 x LASS104 – No 4 Leg 170mm (Pair) – by Front Runner
1 x RRSTJ04 – Slimline II Tray – 1425mm(W) X 752mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 19kg (41lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019 Land Rover Defender 90 2dr Pick-Up
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
2x RRAC068 – Expedition Tubing J (610.5mm and 570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1425mm (56.1") W x 112mm (4.4") H
Weight:
8.46kg (18.6lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014 Land Rover Defender 110 5dr Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Reviews
There are no reviews yet.