Front Runner Slimline II 3/4 Roof Rack Kit for Land Rover Defender 110 (1983-2016)
$1,899
This 2166mm/85.3″ 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
LAND ROVER DEFENDER 110 (1983-2016) SLIMLINE II 3/4 ROOF RACK KIT – BY FRONT RUNNER
This 2166mm/85.3″ 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
Additional information
Additional information
Consisting of:
3 x LASS108 – No 8 Leg 250mm (Pair) – by Front Runner
1 x RRSTJ11 – Slimline II Tray – 1425mm(W) X 2166mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 35kg (76lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
This 2166mm/85.3" 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
Content
LAND ROVER DEFENDER 110 (1983-2016) SLIMLINE II 3/4 ROOF RACK KIT - BY FRONT RUNNER
This 2166mm/85.3" 3/4 size Slimline II cargo carrying roof rack kit for your Land Rover Defender 110 contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
PLEASE NOTE: The NAS roll cage on some Land Rover Defenders may interfere with the positing of the gutter mount legs. If you have a NAS roll cage on your Defender, please contact us before you make your purchase.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
TOURING RACKS
Purpose designed to hold an ARB rooftop tent and still provide ample storage at the front of the rack, ARB touring racks are ideal for when a large amount of storage is required. Touring racks incorporate a flat mounting base to affix the tent at the rear of the rack and are manufactured from steel tubing to withstand extreme off-road use.
REAR LADDER FITS DEFENDER
ARB CANOPY ROOF RACKS AND BARS
An ARB canopy roof rack is perfect for carrying timber, ladders and a variety of other equipment. Available in two sizes for dual cab vehicles, both steel and aluminium models are available, incorporating an aerodynamic, durable design. Featuring an open ended design to aid loading, an optional roof rack roller can also be selected (steel racks only) to assist with loading longer items.
ARB’s canopy roof bar systems utilise Thule or Rhino roof bars, supported by an internal steel frame. This ensures that the vehicle, not the canopy, is supporting the load. Both of these roof bar brands offer a massive selection of trade and recreational accessories, making this an extremely versatile system for carrying a wide variety of loads.
Please note: Not all ARB roof rack options listed below may be suitable to be fitted to your vehicle. For help with selecting the right roof rack for your needs, please speak to your local ARB store/stockist.
DESIGNED AND ENGINEERED FOR OFF ROAD USE
All ARB roof racks and mounting kits are designed and engineered for off road use and are rated and tested inline with the roof load limit of each individual vehicle. This means you can be assured that, no matter where you go, your ARB roof rack is up to the task!
ARB FLAT ROOF RACKS
Featuring a fully welded (Fully welded roof racks can also be removed from a vehicle, but as they usually weigh in excess of 20kg and are quite bulky, most drivers tend to leave them up on the roof) . rack assembly, ARB Flat Racks provide the same reliable strength and robustness of the ARB Roof Rack range, enhanced with the added practicality of a flat platform. (A standout advantage of a flat roof rack over an enclosed cage design is its lower profile, which allows for access to carparks that might otherwise be an issue to some vehicles, especially if they’ve been fitted with a raised suspension and/or larger tyres.) Available in alloy (featuring Amplimesh mesh floor) or steel (with crossbars only), fitment of the ARB Flat Rack is interchangeable for any application that takes an existing ARB Roof Rack with the same dimensions.
Fully welded roof racks can also be removed from a vehicle.
Steel Flat Racks
1330mm x 1250mm 23kg
1850mm x 1120mm 27kg
1850mm x 1250mm 30kg
2200mm x 1120mm 31kg
2200mm x 1250mm 33kg
1790mm x 1120mm 26kg
Note: weights for rack only, not including fit kit.Alloy Flat Racks
2200mm x 1250mm 24kg
2200mm x 1120mm 22kg
1790mm x 1120mm 20kg
Note: weights for rack only, not including fit kit.
ARB DELUXE ROOF RACKS AVAILABLE IN STEEL OR ALUMINIUM
ARB Deluxe Roof Racks provide a convenient storage area for lightweight, bulky items.
Manufactured and designed to withstand the most demanding of conditions, Deluxe racks come in a range of sizes for vehicles with or without gutters and are supplied with stainless steel mounting hardware and variable height fitting kits to enable multi-vehicle fitment. The Deluxe roof rack is available as a cab rack for dual cab applications.
A number of optional extras are also available to further tailor the rack to your load carrying requirements.
FEATURES
• Secure Storage - Top rail sits well above rack floor to ensure a secure load and is constructed from tough 25mm tube while the bottom rail utilises 35mm tubing.
• Drainage Channel - Precision cut drainage channel, specifically designed to reduce build-up of dirt and accumulation of moisture.
• Fitting Kit - Variable height fitting kits include stainless steel hardware and allow even greater flexibility for multi-vehicle applications.
• Adjustable Feet and Legs - Pressed steel feet and legs are height and width adjustable, allowing multi-vehicle installations.
• Steel Support Channel - Full length, zinc annealed steel support channel with plastic protection strip to distribute load along the gutter and prevent vehicle damage.
• Deflector Plate (optional) - Air deflector plate significantly reduces wind noise.
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consisting of:
3 x LASS108 – No 8 Leg 250mm (Pair) – by Front Runner
1 x RRSTJ11 – Slimline II Tray – 1425mm(W) X 2166mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 35kg (76lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Reviews
There are no reviews yet.