Out of Stock

Front Runner Ladder for Land Rover Defender 90/110 (1983-2016)

$203

This smart ladder clamps onto the gutter and bolts to the vehicle body with the bottom “step” mounting below the bumper using existing holes.

Out of stock

Description

LAND ROVER DEFENDER 90/110 (1983-2016) LADDER – BY FRONT RUNNER

– Finished with the same weather-resistant black powder coating as Front Runner Roof Racks.
– The ladder conforms to the contours of the vehicle and is made with off-road tough black powder coated Aluminum with stainless steel Hardware for maximum durability and strength.
– Easy installation: The top part of the ladder clamps onto the gutter and bolts to the vehicle body (drilling required).
– Bottom “step” mounts below the bumper using existing holes.

FITMENT:
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 90 3DR Station Wagon

Reviews

There are no reviews yet.

Be the first to review “Front Runner Ladder for Land Rover Defender 90/110 (1983-2016)”

Quick Comparison

SettingsFront Runner Ladder for Land Rover Defender 90/110 (1983-2016) removeFront Runner Slimline II Roof Rack Kit for Land Rover New Defender 110 removeFront Runner Universal Track Non Drilled 1800mm(l) removeFront Runner Water Tank with Mounting System 42L removeFront Runner Slat to Load Bar Conversion End Cap Kit removeFront Runner Rivnut Tool M6/M8 remove
NameFront Runner Ladder for Land Rover Defender 90/110 (1983-2016) removeFront Runner Slimline II Roof Rack Kit for Land Rover New Defender 110 removeFront Runner Universal Track Non Drilled 1800mm(l) removeFront Runner Water Tank with Mounting System 42L removeFront Runner Slat to Load Bar Conversion End Cap Kit removeFront Runner Rivnut Tool M6/M8 remove
Image
SKULALD005KRLD034TTRAC010WTAN030RRAC044VACC016
Rating
Price$203$1,685$200$269$20$23
Stock

Out of stock

Out of stock

Out of stock

AvailabilityOut of stockOut of stockOut of stock
Add to cart

DescriptionThis smart ladder clamps onto the gutter and bolts to the vehicle body with the bottom "step" mounting below the bumper using existing holes.Introduce your Defender to new adventures with this New Defender Foot Rail Kit. Engineered to get your Defender through the world’s roughest terrains while complimenting the sleek design, your Defender will be at home both on, and off-road.Mount Front Runner roof rack feet into this smart and strong universal track.This compact and sporty 42L / 11.1 gal Water Tank includes mounting brackets for the Slimline II Roof Rack. Built strong and off-road tough, the Front Runner 42l Water Tank is a perfect solution for water storage when space is at a premium.Convert any size slat to a load bar with these plastic end caps.Use this tool to insert M6 and M8 rivnuts.
Content

LAND ROVER DEFENDER 90/110 (1983-2016) LADDER - BY FRONT RUNNER

- Finished with the same weather-resistant black powder coating as Front Runner Roof Racks. - The ladder conforms to the contours of the vehicle and is made with off-road tough black powder coated Aluminum with stainless steel Hardware for maximum durability and strength. - Easy installation: The top part of the ladder clamps onto the gutter and bolts to the vehicle body (drilling required). - Bottom "step" mounts below the bumper using existing holes. FITMENT: - 2019-2020 Land Rover Defender 110 5dr Station Wagon - 2019-2020 Land Rover Defender 90 3DR Station Wagon

LAND ROVER NEW DEFENDER 110 SLIMLINE II ROOF RACK KIT - BY FRONT RUNNER

This 2166mm/85.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your New Defender 110. Easy fitment using OEM mounting points. The OEM Tracks need to be removed when fitting this Foot Rails Kit. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables. These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller prep and 1 larger camp size table). All Front Runner Racks are backed by a Limited Lifetime Warranty* For further information on installation, please see the fitment instructions in the INSTALL tab. Note: The Land Rover OEM ladder & OEM storage box is not suited with rack fitment.

UNIVERSAL TRACK NON DRILLED / 1800MM(L) - BY FRONT RUNNER

The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot. • Suitable for universal fitment of a roof rack should the vehicle roof allow. • Often used for trailers and canopies to mount a rack or load bars. • Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track. • Powder coated black. • Comes in pairs. VIDEOS:

WATER TANK WITH MOUNTING SYSTEM / 42L - BY FRONT RUNNER

• 42L/11.1 gal capacity. • Made of food grade polyethylene and is BPA free. • Brass pipe fittings. Includes brackets necessary to mount the tank at the sides of the Slimline II Roof Rack. In order to mount the tank away from the sides either perpendicular or parallel to the rack slats, 42l Water Tank Optional Mounting Brackets are needed. Sold Separately. A Premium Water Tank Hose Kit, sold separately, is available for this water tank. To mount this 42L Water Tank to an original Slimline Roof Rack, the 42l Water Tank Optional Mounting Brackets are needed. Sold Separately. VIDEOS:

SLAT TO LOAD BAR CONVERSION END CAP KIT - BY FRONT RUNNER

• Convert any size slat to a load bar with these plastic end caps. • Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat. • Just pop them on and your slat to load bar "conversion" is complete! • Supplied in sets of (4) four. Consists of: • 4x Load Bar End-caps Material used: • Plastic - Polypropylene Product Dimensions: • 91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H Weight: • 80g (2.8oz) VIDEOS:

RIVNUT TOOL / M6/M8 - BY FRONT RUNNER

- Use this tool to insert M6 and M8 rivnuts. VIDEOS:
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Consisting of:

1 x FALD008 – Land Rover Defender L663 (2020-Current) Foot Rails – by Front Runner
1 x RRSTD11 – Slimline II Tray – 1255mm(W) X 2166mm(L) – by Front Runner

Material used:

Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel

Approximate Installed Weight:

32kg (70lbs)

Shipping Dimensions:

Width 440mm (17.3")
Length 1730mm (68.1")
Height 245mm (9.7")

Shipping Weight:

Weight 42.8kg (94.4lbs)

Consists of:

1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide

Materials used:

Black powder coated aluminum
Rubber

Product Dimensions:

1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H

Weight:

2.6kg (5.7lbs)

Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Consists of:

1x Water tank
1x Mounting bracket
1x Nut and bolt kit

Material used:

Tank: Food grade, BPA-free polyethylene
Bracket: Black powder coated 3CR12 stainless steel

Product Dimensions:

515mm (20.3") L x 343mm (13.5") W x 345mm (13.6") H (Tank and Mounting strap)

Weight:

5.8kg (12.8lbs)