In Stock

Front Runner Expedition Rail Kit – Full Perimeter for 1475mm(w) Rack

$429

Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1475mm wide Front Runner Slimline II Roof Rack.

Description

EXPEDITION RAIL KIT – FULL PERIMETER – FOR 1475MM(W) RACK – BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1475mm wide Front Runner Slimline II Roof Racks.

• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.

The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.

DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!

PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.

VIDEOS:

Additional information

Consists of:

2x RRAC069 – Expedition Tubing M (635.5mm and 570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit

Materials used:

Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing

Product Dimensions:

Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1475mm (58.1") W x 112mm (4.4") H

Weight:

8.62kg (19lbs)

Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up

Reviews

There are no reviews yet.

Be the first to review “Front Runner Expedition Rail Kit – Full Perimeter for 1475mm(w) Rack”

Quick Comparison

SettingsFront Runner Expedition Rail Kit - Full Perimeter for 1475mm(w) Rack removeARB Canopy Roof Racks & Bars for Land Rover Defender removeARB Flat Roof Rack for Land Rover Defender removeFront Runner Expedition Rail Kit - Front of Back for 1425mm(w) Rack removeFront Runner Inter-Slat Brackets removeFront Runner 1345mm Slat Add-on Kit remove
NameFront Runner Expedition Rail Kit - Full Perimeter for 1475mm(w) Rack removeARB Canopy Roof Racks & Bars for Land Rover Defender removeARB Flat Roof Rack for Land Rover Defender removeFront Runner Expedition Rail Kit - Front of Back for 1425mm(w) Rack removeFront Runner Inter-Slat Brackets removeFront Runner 1345mm Slat Add-on Kit remove
Image
SKUKRXM002KRXJ001RRAC034RRSAG1345
Rating
Price$429$149$55$89
Stock
Availability
Add to cart

DescriptionEffortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1475mm wide Front Runner Slimline II Roof Rack.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1425mm wide Front Runner Slimline II Roof Rack.If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next to a joiner. These brackets can also be used to position a Front Runner Single Jerry Can holder between slats, parallel to the slats.More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Content

EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1475MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1475mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!! PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information. VIDEOS:

ARB CANOPY ROOF RACKS AND BARS

An ARB canopy roof rack is perfect for carrying timber, ladders and a variety of other equipment. Available in two sizes for dual cab vehicles, both steel and aluminium models are available, incorporating an aerodynamic, durable design. Featuring an open ended design to aid loading, an optional roof rack roller can also be selected (steel racks only) to assist with loading longer items. ARB’s canopy roof bar systems utilise Thule or Rhino roof bars, supported by an internal steel frame. This ensures that the vehicle, not the canopy, is supporting the load. Both of these roof bar brands offer a massive selection of trade and recreational accessories, making this an extremely versatile system for carrying a wide variety of loads. Please note: Not all ARB roof rack options listed below may be suitable to be fitted to your vehicle. For help with selecting the right roof rack for your needs, please speak to your local ARB store/stockist. DESIGNED AND ENGINEERED FOR OFF ROAD USE All ARB roof racks and mounting kits are designed and engineered for off road use and are rated and tested inline with the roof load limit of each individual vehicle. This means you can be assured that, no matter where you go, your ARB roof rack is up to the task!

ARB FLAT ROOF RACK

Featuring a fully welded rack assembly, ARB Flat Racks provide the same reliable strength and robustness of the ARB Roof Rack range, enhanced with the added practicality of a flat platform. Available in alloy (featuring Amplimesh mesh floor) or steel (with crossbars only), fitment of the ARB Flat Rack is interchangeable for any application that takes an existing ARB Roof Rack with the same dimensions.

EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1425MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1425mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits. To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit. VIDEOS:

INTER-SLAT BRACKETS - BY FRONT RUNNER

For additional information, see the Installation Instructions in the INSTALLATION TAB to determine if you need this product when adding additional slats to your Slimline II roof rack. **If building a solid platform on your Slimline II and you need these brackets, note that the slats used in conjunction with the bracket will need to be ONE SIZE SMALLER than the slats used in your rack. FOR USE WITH THE SINGLE JERRY CAN HOLDER: The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you'd like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets. VIDEOS:

1345MM SLAT ADD-ON KIT - BY FRONT RUNNER

• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points. • Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray. • This slat will work with any Front Runner Slimline II Rack that is 1345mm wide. • Can also be used to build a custom Load Bar Kit, or as a replacement slat. • Features T-slots on both the top and bottom faces. • A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment. • Made from the same black powder coated aluminum as all Front Runner Racks. NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately. VIDEOS:
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Consists of:

2x RRAC069 – Expedition Tubing M (635.5mm and 570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit

Materials used:

Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing

Product Dimensions:

Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1475mm (58.1") W x 112mm (4.4") H

Weight:

8.62kg (19lbs)

Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up

Consists of:

RRAC068 – Expedition Tubing J (610.5mm and 570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner

Materials used:

Powder coated Aluminium die cast joints
Powder coated 304 Stainless Steel tubing

Product Dimensions

690mm (27.2") L x 1425mm (56.1") W x 112mm (4.4") H

Weight:

2.84kg (6.3lbs)

Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Consists of:

2 x Inter-Slat Brackets
2 x Slat End Caps
Installation Hardware
Fitting Instructions

Materials used:

Black powder coated 3CR12 stainless steel

Product Dimensions:

227mm (8.9") L x 120mm (4.7") W x 25mm (1") H

Weight:

1.2kg (2.7lbs)

Consisting of:

1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1345 – Standard Slat- 1345mm Wide Rack
Approximate Installed Weight 2kg (4lbs)

Shipping Dimensions:

Width 110mm (4")
Length 1350mm (53")
Height 70mm (3")

Shipping Weight:

Weight 2.3kg (5.0lbs)

Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up