EEZI-AWN 1000/2000 SERIES AWNING BRACKETS – BY FRONT RUNNER
• These brackets, sold in a set of two (2), are fastened to the 1000/2000 Series Awning which in turn fastens to the side profile of your Front Runner Slimline II roof rack.
• Pre-cut holes designed specifically for this Awning allow easy attachment. No drilling required.
• Each bracket fastens to the t-slot system on the top and bottom of the Slimline II roof rack side profile.
• Made from 3CR12 stainless steel to ensure durability, and black powder coated with the same weather resistant coating as the Slimline II roof rack.
VIDEOS:
Additional information
Additional information
Consists of:
2 x Front Runner Awning Brackets
Mounting hardware
Materials used:
Black powder-coated 3CR12 stainless steel
Product Dimensions:
80mm (3.2") W x 70mm (2.8") D x 120mm (4.7") H
Weight:
1.4kg (3.1lbs)
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner EEZI-Awn 1000/2000 Series Awning Brackets” Cancel reply
Easily mount the Eezi Awn 1000/2000 Series awning to your Front Runner Slimline II Roof Rack, no drilling required.
So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.
It’s time to introduce your all new Defender to new adventures. Engineered to get your Defender through the world’s roughest terrains, this Land Rover New Defender Slimline II Roof Rack is at home both on, and off-road. Welcome to the new era of adventure.
This lightweight, sturdy prep-sized camp table is ideal for food preparation, food serving, and gathering around to eat. Features include a stainless steel top and black powder-coated aluminum frame. Specifically designed to be easily stored UNDERNEATH most Front Runner Slimline II Roof Racks.*
The Pro Stainless Steel Prep Table Kit includes the Pro Stainless Steel Prep Table, Under-Rack Table Slides and Under-Rack Table Slides Latch.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1345mm wide Front Runner Slimline II Roof Rack.
Mount Front Runner roof rack feet into this smart and strong universal track.
Content
EEZI-AWN 1000/2000 SERIES AWNING BRACKETS - BY FRONT RUNNER
• These brackets, sold in a set of two (2), are fastened to the 1000/2000 Series Awning which in turn fastens to the side profile of your Front Runner Slimline II roof rack.
• Pre-cut holes designed specifically for this Awning allow easy attachment. No drilling required.
• Each bracket fastens to the t-slot system on the top and bottom of the Slimline II roof rack side profile.
• Made from 3CR12 stainless steel to ensure durability, and black powder coated with the same weather resistant coating as the Slimline II roof rack.
VIDEOS:
ADDITIONAL TRAY SLAT BOLTS - BY FRONT RUNNER
- So you're adding slats onto your rack? Use these additional tray slat bolts to fasten them. Sold in pairs.
Consists of:
• 2x M8x25 Button Heads
VIDEOS:
LAND ROVER NEW DEFENDER 110 W/OEM TRACKS SLIMLINE II ROOF RACK KIT - BY FRONT RUNNER
This 1560mm/61.4" long, full-size, Slimline II cargo carrying roof rack kit for the Land Rover New Defender contains 1 Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
This Rack Kit has a side opening to allow fitment of the Pro Stainless Steel Prep Table Kit.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
PRO STAINLESS STEEL PREP TABLE KIT - BY FRONT RUNNER
A complete prep table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure.
Pro Stainless Steel Prep Table - by Front Runner:
• The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise.
• A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals.
• The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack.
• The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place.
• Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack.
Under-Rack Table Brackets - by Front Runner:
• A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Prep Table.
• The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle.
• Easy installation.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
Under-Rack Table Slides Latch - by Front Runner:
• Keeps the Pro Stainless Steel Prep Table securely stored in the Under-Rack Table Brackets - by Front Runner.
• Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place.
• A rubber insert prevents rattling and damage to the table.
• Spring loaded for ease of use.
• Lockable for added security.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.
VIDEOS:
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1345MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit.
VIDEOS:
UNIVERSAL TRACK NON DRILLED / 1800MM(L) - BY FRONT RUNNER
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
• Suitable for universal fitment of a roof rack should the vehicle roof allow.
• Often used for trailers and canopies to mount a rack or load bars.
• Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
• Powder coated black.
• Comes in pairs.
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
2 x Front Runner Awning Brackets
Mounting hardware
Materials used:
Black powder-coated 3CR12 stainless steel
Product Dimensions:
80mm (3.2") W x 70mm (2.8") D x 120mm (4.7") H
Weight:
1.4kg (3.1lbs)
Consisting of:
3x FASS013 – Foot Set / 60mm – 70mm
3x RRAC930 – Land Rover New Defender (L663) OEM Track Mount Kit
1x RRSTD08 – SLII Tray – 1255mm(W)X1560mm(L)
1x WDST009 – Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder – coated T6 aluminium
High strength steel
Materials used:
Black powder-coated aluminum
3CR12 Stainless steel
Product Dimensions:
1130mm (44.5") L x 550mm (21.7") W x 35mm (1.4") H
Height when opened: 734mm (28.9") H
Weight:
10.03kg (22.1lbs)
Table Slide:
Materials used:
Black powder-coated 3CR12 Stainless Steel
Product Dimensions:
881mm (34.7") L x 187mm (7.4") W x 46mm (1.8") H
Weight:
2.4kg (5.3lbs)
Table Latch:
Materials used:
Black powder-coated 3CR12 Stainless Steel
PVC Grommet
Product Dimensions:
91mm (3.6") L x 51.7mm (2") W x 47mm (1.9") H
Weight:
191g (6.7oz)
Full Kit Dimensions:
1165mm (45.9") L x 642mm (25.3") W x 109mm (4.3") H
Full Kit Weight:
12.6 Kg (27.8lbs)
TABLE CARE:
Keep your table clean and sparkling with these easy care instructions.
Add a small amount of dish soap to a damp soft cloth.
Wipe the table along the grain of your tabletop.
Dry excess moisture with a dry towel.
Quickly add polish by dabbing on a small amount of mineral or
baby oil, wiping with the grain of the stainless steel.
Done!
Consists of:
RRAC067 – Expedition Tubing G (570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide
Materials used:
Black powder coated aluminum
Rubber
Product Dimensions:
1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H
Weight:
2.6kg (5.7lbs)
Fitment:
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Reviews
There are no reviews yet.