Out of Stock

20L Red Jerry Can w/ Spout & Adapter

$88

Finally, a solid, quality built carb complaint Jerry Can that’s off-road tough and looks great too. Includes a carb compliant spout and diesel adapter spout. Features a full internal breather pipe for splash-proof pouring. Interior coated with Rezol lining to prevent rusting.

Out of stock

SKU: JCFU009 Categories: , , , , , , , , , Tags: , ,

Description

20L RED JERRY CAN W/ SPOUT AND ADAPTER

• Fully paint-coated inside and outside.
• Have a full, internal breather pipe for splash-proof pouring.
• The highest quality Jerry can out there.
• Original Mil Spec.
• DOT, EPA and CARB approved.
• Comes with a safety spout attached and also has an adapter for vehicles with smaller filler receivers.
• Manufactured from 0.9mm Cold Rolled Steel (DC 04 EN 10130).
• Dual pan construction.
• Unique wide channel breather for better smoother pouring.
• Seam welded for extra strength.
• Three Handle Configuration.
• Leak-proof Bayonet Closure.
• Locking pin in cap.
• Strengthened hinge on cap to prevent accidental bending when closing.
• Cap designed to hold open when discharging the can.
• Lined inside with fuel resistant Rezol enamel to prevent rusting.
• Painted exterior epoxy polyester powder coat.
• Manufactured and tested to comply with the following standards: DOT, EPA, C.A.R.B., DIN 7274 and BAM – GGR001. Australian Standard – AS 2906. German Standard–TUV/GS. Swedish Standard-SP. UN–Dangerous goods approval.

Additional information

Consists of:

1 x Jerry Can
1 x Carb Compliant Spout
Materials used:

0.9mm Cold Rolled Steel (DC 04 EN 10130)
Product Dimensions:

165.1mm (6.5") L x 342.9 (13.5") W x 469.9mm (18.5) H
Weight:

5.44kg (12lbs)
Fitment:

2021 Land Rover Defender 90 L663 3 Door
2021 Land Rover Defender 110 L663 5 Door
2020 Land Rover Defender 130 2DR Pick Up
2020 Land Rover Defender 130 4DR Pick Up
2020 Land Rover Defender 90
2020 Land Rover Defender 90 2DR Pick Up
2020 Land Rover Defender 90 3DR Station Wagon
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Reviews

There are no reviews yet.

Be the first to review “20L Red Jerry Can w/ Spout & Adapter”

Quick Comparison

Settings20L Red Jerry Can w/ Spout & Adapter removeFront Runner Expedition Rail Kit - Full Perimeter for 1165mm(w) Rack removeFront Runner Slat to Load Bar Conversion End Cap Kit removeFront Runner Rack Adaptor Plates for Thule Slotted Load Bars removeFront Runner Inter-Slat Brackets removeFront Runner Expedition Rail Kit - Front or Back for 1165mm(w) Rack remove
Name20L Red Jerry Can w/ Spout & Adapter removeFront Runner Expedition Rail Kit - Full Perimeter for 1165mm(w) Rack removeFront Runner Slat to Load Bar Conversion End Cap Kit removeFront Runner Rack Adaptor Plates for Thule Slotted Load Bars removeFront Runner Inter-Slat Brackets removeFront Runner Expedition Rail Kit - Front or Back for 1165mm(w) Rack remove
Image
SKUJCFU009KRXA002RRAC044RRAC017RRAC034KRXA001
Rating
Price$88$413$20$90$55$129
Stock

Out of stock

AvailabilityOut of stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionFinally, a solid, quality built carb complaint Jerry Can that’s off-road tough and looks great too. Includes a carb compliant spout and diesel adapter spout. Features a full internal breather pipe for splash-proof pouring. Interior coated with Rezol lining to prevent rusting.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1165mm wide Front Runner Slimline II Roof Rack.Convert any size slat to a load bar with these plastic end caps.These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack. These plates can also be used to mount a Front Runner Slimline II Roof Rack Tray to Thule slotted Load Bars.If you wish to add additional slats to a Slimline II Roof Rack that is 8 slats or more long, (ie. to create a solid platform for sitting, photography, etc.), these brackets are needed for those additional slats that are to be positioned next to a joiner. These brackets can also be used to position a Front Runner Single Jerry Can holder between slats, parallel to the slats.Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1165mm wide Front Runner Slimline II Roof Rack.
Content

20L RED JERRY CAN W/ SPOUT AND ADAPTER

• Fully paint-coated inside and outside. • Have a full, internal breather pipe for splash-proof pouring. • The highest quality Jerry can out there. • Original Mil Spec. • DOT, EPA and CARB approved. • Comes with a safety spout attached and also has an adapter for vehicles with smaller filler receivers. • Manufactured from 0.9mm Cold Rolled Steel (DC 04 EN 10130). • Dual pan construction. • Unique wide channel breather for better smoother pouring. • Seam welded for extra strength. • Three Handle Configuration. • Leak-proof Bayonet Closure. • Locking pin in cap. • Strengthened hinge on cap to prevent accidental bending when closing. • Cap designed to hold open when discharging the can. • Lined inside with fuel resistant Rezol enamel to prevent rusting. • Painted exterior epoxy polyester powder coat. • Manufactured and tested to comply with the following standards: DOT, EPA, C.A.R.B., DIN 7274 and BAM – GGR001. Australian Standard – AS 2906. German Standard–TUV/GS. Swedish Standard-SP. UN–Dangerous goods approval.

EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1165MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1165mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4" to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets! PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information. Videos:

SLAT TO LOAD BAR CONVERSION END CAP KIT - BY FRONT RUNNER

• Convert any size slat to a load bar with these plastic end caps. • Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat. • Just pop them on and your slat to load bar "conversion" is complete! • Supplied in sets of (4) four. Consists of: • 4x Load Bar End-caps Material used: • Plastic - Polypropylene Product Dimensions: • 91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H Weight: • 80g (2.8oz) VIDEOS:

RACK ADAPTOR PLATES FOR THULE SLOTTED LOAD BARS - BY FRONT RUNNER

These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack. If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack. If you currently own Thule Load Bars on your vehicle, you can also use these adapter plates to mount a Front Runner Slimline II Roof Rack Tray to your load bars. Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.) • 3CR12 stainless steel. • Black powder coated. • Mounts onto individual slats via the T-slot system. • T-slot bolts included. • Pre-cut fitment holes. VIDEOS:

INTER-SLAT BRACKETS - BY FRONT RUNNER

For additional information, see the Installation Instructions in the INSTALLATION TAB to determine if you need this product when adding additional slats to your Slimline II roof rack. **If building a solid platform on your Slimline II and you need these brackets, note that the slats used in conjunction with the bracket will need to be ONE SIZE SMALLER than the slats used in your rack. FOR USE WITH THE SINGLE JERRY CAN HOLDER: The Front Runner Single Jerry Can Holder is designed to be mounted perpendicular ACROSS 2 slats. If you'd like to mount a single jerry can holder PARALLEL to the slats, you will need to use these brackets. VIDEOS:

EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1165MM(W) RACK - BY FRONT RUNNER

Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1165mm wide Front Runner Slimline II Roof Racks. • Install in minutes. • No drilling required. • Adds extra cargo support. • Attractive, low profile design. • Mounting hardware included. • Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack. • Manufactured with corrosion resistant, high-density aluminum components. • The Expedition Rails add 61mm / 2.4” to the height of the roof rack. The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent. Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits. To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit Videos:
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Consists of:

1 x Jerry Can
1 x Carb Compliant Spout
Materials used:

0.9mm Cold Rolled Steel (DC 04 EN 10130)
Product Dimensions:

165.1mm (6.5") L x 342.9 (13.5") W x 469.9mm (18.5) H
Weight:

5.44kg (12lbs)
Fitment:

2021 Land Rover Defender 90 L663 3 Door
2021 Land Rover Defender 110 L663 5 Door
2020 Land Rover Defender 130 2DR Pick Up
2020 Land Rover Defender 130 4DR Pick Up
2020 Land Rover Defender 90
2020 Land Rover Defender 90 2DR Pick Up
2020 Land Rover Defender 90 3DR Station Wagon
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:

2x RRAC065 – Expedition Tubing A (480.5mm & 365.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Materials used:

Powder coated Aluminium die cast joints.
Powder coated 304 Stainless Steel tubing
Product Dimensions:

Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1165mm (45.9") W x 112mm (4.4") H
Weight:

7.5kg (16.5lbs)
Fitment:

– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 110 4DR Pick Up
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Works with:

Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:

2.5mm (0.098") 3CR12 stainless steel, supplied with mountings for Aero and Square Bar
Consists of:

4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:

L 285mm (11.22") x W 205mm (8.07") x H 55mm (2.16")
Weight:

2kg (4.4lbs)
Consists of:

2 x Inter-Slat Brackets
2 x Slat End Caps
Installation Hardware
Fitting Instructions
Materials used:

Black powder coated 3CR12 stainless steel
Product Dimensions:

227mm (8.9") L x 120mm (4.7") W x 25mm (1") H
Weight:

1.2kg (2.7lbs)
Consists of:

RRAC065 – Expedition Tubing A (480.5mm & 365.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
Materials used:

Powder coated Aluminium die cast joints.
Powder coated 304 Stainless Steel tubing
Product Dimensions:

485mm (19.1") L x 1165mm (45.9") W x 112mm (4.4") H
Weight:

2.36kg (5.2lbs)
Fitment:

2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 110 4DR Pick Up
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up

Related products