Need more coverage? Create additional protection when using your Easy-Out Awning / 2.5M. This Wind/Sun Break, easily attaches to your awing to create a front wall for more protection from the elements.
WIND BREAK FOR 2.5M AWNING / FRONT – BY FRONT RUNNER
• Easily attaches to the front your Easy-Out Awning / 2.5M – Easy-Out Awning 2.5M.
• Slides into the extrusion channel on the horizontal support pole of your awning and pegs securely to the ground at the desired angle.
• Made from the same 400d oxford/polyester ripstop, UV-resistant as the Easy-Out Awning / 2.5M – Easy-Out Awning 2.5M.
• Provides extra protection from the sun, wind and other elements.
• Includes 4 tent stakes to secure your Wind/Sun Break for 2.5M Awning / Front – by Front Runner
Additional information
Additional information
Consists of:
1 x Waterproof, UV-resistant awning panel with securing straps
4 x Tent stakes
Need more coverage? Create additional protection when using your Easy-Out Awning / 2.5M. This Wind/Sun Break, easily attaches to your awing to create a front wall for more protection from the elements.
This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender Pickup contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
The name says it all. Turn your entire vehicle into a handy way to open your beers.
So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.
This lightweight, sturdy prep-sized camp table is ideal for food preparation, food serving, and gathering around to eat. Features include a stainless steel top and black powder-coated aluminum frame. Specifically designed to be easily stored UNDERNEATH most Front Runner Slimline II Roof Racks.*
The Pro Stainless Steel Prep Table Kit includes the Pro Stainless Steel Prep Table, Under-Rack Table Slides and Under-Rack Table Slides Latch.
This rubber beading fits into your Front Runner Roof Rack t-slots to create a perfect rattle free and non-slip surface. Sold in 1.5m/5' lengths.
Content
WIND BREAK FOR 2.5M AWNING / FRONT - BY FRONT RUNNER
• Easily attaches to the front your Easy-Out Awning / 2.5M - Easy-Out Awning 2.5M.
• Slides into the extrusion channel on the horizontal support pole of your awning and pegs securely to the ground at the desired angle.
• Made from the same 400d oxford/polyester ripstop, UV-resistant as the Easy-Out Awning / 2.5M - Easy-Out Awning 2.5M.
• Provides extra protection from the sun, wind and other elements.
• Includes 4 tent stakes to secure your Wind/Sun Break for 2.5M Awning / Front - by Front Runner
LAND ROVER DEFENDER (1983-2016) PICKUP TRUCK SLIMLINE II ROOF RACK KIT - BY FRONT RUNNER
• This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender Pickup contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
Videos:
RACK MOUNTED BOTTLE OPENER - BY FRONT RUNNER
• Fit a bottle opener to your rack for wn ever you need to crack open a cool one.
• Black powder coated stainless steel for protection against the elements.
• Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.
Consists of:
• 1x Bracket
• 1x Nut and blot kit
Materials used:
• 2mm (0.08") black powder coated 3CR12 stainless steel
Product Dimensions:
• 49mm (1.9") L x 53mm (2.1") W x 36mm (1.4") H
Weight:
• 96g (3.4oz)
VIDEOS:
ADDITIONAL TRAY SLAT BOLTS - BY FRONT RUNNER
- So you're adding slats onto your rack? Use these additional tray slat bolts to fasten them. Sold in pairs.
Consists of:
• 2x M8x25 Button Heads
VIDEOS:
PRO STAINLESS STEEL PREP TABLE KIT - BY FRONT RUNNER
A complete prep table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure.
Pro Stainless Steel Prep Table - by Front Runner:
• The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise.
• A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals.
• The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack.
• The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place.
• Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack.
Under-Rack Table Brackets - by Front Runner:
• A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Prep Table.
• The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle.
• Easy installation.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
Under-Rack Table Slides Latch - by Front Runner:
• Keeps the Pro Stainless Steel Prep Table securely stored in the Under-Rack Table Brackets - by Front Runner.
• Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place.
• A rubber insert prevents rattling and damage to the table.
• Spring loaded for ease of use.
• Lockable for added security.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.
VIDEOS:
T-SLOT RUBBER BEADING - BY FRONT RUNNER
Need a little extra insulation between your rack and gear?
The Front Runner T-Slot Rubber Beading slides easily into your Front Runner rack t-slots for extra grip and cushioning. It reduces rattles and is great for storage boxes, firewood, or any other item that you want to insulate from your rack. Comes in 1.5m (5') lengths.
On some vehicles with sun roofs, installing the t-slot beading on the front slats may help lessen wind noise.
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Waterproof, UV-resistant awning panel with securing straps
4 x Tent stakes
2 x LASS104 – No 4 Leg 170mm (Pair) – by Front Runner
1 x RRSTJ04 – Slimline II Tray – 1425mm(W) X 752mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 19kg (41lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019 Land Rover Defender 90 2dr Pick-Up
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1 x Table
1 x Storage Slides
1 x Latch
Table:
Materials used:
Black powder-coated aluminum
3CR12 Stainless steel
Product Dimensions:
1130mm (44.5") L x 550mm (21.7") W x 35mm (1.4") H
Height when opened: 734mm (28.9") H
Weight:
10.03kg (22.1lbs)
Table Slide:
Materials used:
Black powder-coated 3CR12 Stainless Steel
Product Dimensions:
881mm (34.7") L x 187mm (7.4") W x 46mm (1.8") H
Weight:
2.4kg (5.3lbs)
Table Latch:
Materials used:
Black powder-coated 3CR12 Stainless Steel
PVC Grommet
Product Dimensions:
91mm (3.6") L x 51.7mm (2") W x 47mm (1.9") H
Weight:
191g (6.7oz)
Full Kit Dimensions:
1165mm (45.9") L x 642mm (25.3") W x 109mm (4.3") H
Full Kit Weight:
12.6 Kg (27.8lbs)
TABLE CARE:
Keep your table clean and sparkling with these easy care instructions.
Add a small amount of dish soap to a damp soft cloth.
Wipe the table along the grain of your tabletop.
Dry excess moisture with a dry towel.
Quickly add polish by dabbing on a small amount of mineral or
baby oil, wiping with the grain of the stainless steel.
Done!
Consists of:
1.5m (5') Length of beading
Materials used:
Ethylene propylene diene monomer (M-class) all weather rubber
Reviews
There are no reviews yet.