Front Runner Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1964mm(L)
$1,541
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1″ (W) x 1964mm/77.3″ (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
TRUCK CANOPY OR TRAILER WITH OEM TRACK SLIMLINE II RACK KIT / TALL / 1425MM(W) X 1964MM(L) – BY FRONT RUNNER
• These kits include the rack tray, wind deflector, track and feet – everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
Additional information
Additional information
Consisting of:
4 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTJ10 – Slimline II Tray – 1425mm(W) X 1964mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1964mm/77.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
Mount Front Runner roof rack feet into this smart and strong universal track.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1165mm wide Front Runner Slimline II Roof Rack.
So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.
This compact and sporty 42L / 11.1 gal Water Tank includes mounting brackets for the Slimline II Roof Rack. Built strong and off-road tough, the Front Runner 42l Water Tank is a perfect solution for water storage when space is at a premium.
Convert any size slat to a load bar with these plastic end caps.
Content
TRUCK CANOPY OR TRAILER WITH OEM TRACK SLIMLINE II RACK KIT / TALL / 1425MM(W) X 1964MM(L) - BY FRONT RUNNER
• These kits include the rack tray, wind deflector, track and feet - everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
UNIVERSAL TRACK NON DRILLED / 1800MM(L) - BY FRONT RUNNER
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
• Suitable for universal fitment of a roof rack should the vehicle roof allow.
• Often used for trailers and canopies to mount a rack or load bars.
• Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
• Powder coated black.
• Comes in pairs.
VIDEOS:
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1165MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
Please note: this kit only works with 1165mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
Videos:
ADDITIONAL TRAY SLAT BOLTS - BY FRONT RUNNER
- So you're adding slats onto your rack? Use these additional tray slat bolts to fasten them. Sold in pairs.
Consists of:
• 2x M8x25 Button Heads
VIDEOS:
WATER TANK WITH MOUNTING SYSTEM / 42L - BY FRONT RUNNER
• 42L/11.1 gal capacity.
• Made of food grade polyethylene and is BPA free.
• Brass pipe fittings.
Includes brackets necessary to mount the tank at the sides of the Slimline II Roof Rack. In order to mount the tank away from the sides either perpendicular or parallel to the rack slats, 42l Water Tank Optional Mounting Brackets are needed. Sold Separately.
A Premium Water Tank Hose Kit, sold separately, is available for this water tank.
To mount this 42L Water Tank to an original Slimline Roof Rack, the 42l Water Tank Optional Mounting Brackets are needed. Sold Separately.
VIDEOS:
SLAT TO LOAD BAR CONVERSION END CAP KIT - BY FRONT RUNNER
• Convert any size slat to a load bar with these plastic end caps.
• Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
• Just pop them on and your slat to load bar "conversion" is complete!
• Supplied in sets of (4) four.
Consists of:
• 4x Load Bar End-caps
Material used:
• Plastic - Polypropylene
Product Dimensions:
• 91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
• 80g (2.8oz)
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consisting of:
4 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTJ10 – Slimline II Tray – 1425mm(W) X 1964mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
Consists of:
1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide
Materials used:
Black powder coated aluminum
Rubber
Product Dimensions:
1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H
Weight:
2.6kg (5.7lbs)
Fitment:
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
RRAC065 – Expedition Tubing A (480.5mm & 365.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
485mm (19.1") L x 1165mm (45.9") W x 112mm (4.4") H
Weight:
2.36kg (5.2lbs)
Fitment:
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 110 4DR Pick Up
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1x Water tank
1x Mounting bracket
1x Nut and bolt kit
