Front Runner Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1475mm(W) X 2368mm(L)
$2,051
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1″ (W) x 2368mm/93.2″ (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.
See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
TRUCK CANOPY OR TRAILER SLIMLINE II RACK KIT / TALL / 1475MM(W) X 2368MM(L) – BY FRONT RUNNER
• These kits include the rack tray, wind deflector, track and feet – everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. • Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
Additional information
Additional information
Consisting of:
4 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTM12 – Slimline II Tray – 1475mm(W) X 2368mm(L) – by Front Runner
2 x TRCA003 – Canopy Tracks / 1150mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
– 2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1475mm(W) X 2368mm(L)” Cancel reply
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 2368mm/93.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29.5” long pair of tracks can be easily mounted to your canopy/shell or trailer.
See the Track installation instructions in the INSTALL tab for further details.
This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1345mm wide Front Runner Slimline II Roof Rack.
This lightweight, sturdy prep-sized camp table is ideal for food preparation, food serving, and gathering around to eat. Features include a stainless steel top and black powder-coated aluminum frame. Specifically designed to be easily stored UNDERNEATH most Front Runner Slimline II Roof Racks.*
The Pro Stainless Steel Prep Table Kit includes the Pro Stainless Steel Prep Table, Under-Rack Table Slides and Under-Rack Table Slides Latch.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1425mm wide Front Runner Slimline II Roof Rack.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1345mm wide Front Runner Slimline II Roof Rack.
The name says it all. Turn your entire vehicle into a handy way to open your beers.
Content
TRUCK CANOPY OR TRAILER SLIMLINE II RACK KIT / TALL / 1475MM(W) X 2368MM(L) - BY FRONT RUNNER
• These kits include the rack tray, wind deflector, track and feet - everything you need to mount a Slimline II Rack to truck canopies/camper shells/caps and trailers.
• The Slimline II Tray mounts to supplied Feet that slide into the supplied Track. The Track can be easily mounted to your canopy/shell or trailer with the supplied fasteners. If you currently have track in your canopy or trailer, we recommend replacing it with the stronger, integrated Front Runner track. See the Track installation instructions in the INSTALL tab for further details. • Please Note: Taller kits have space for mounting the Front Runner tables or other compatible accessories UNDERNEATH the rack.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
VIDEOS:
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1345MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit.
VIDEOS:
PRO STAINLESS STEEL PREP TABLE KIT - BY FRONT RUNNER
A complete prep table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure.
Pro Stainless Steel Prep Table - by Front Runner:
• The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise.
• A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals.
• The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack.
• The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place.
• Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack.
Under-Rack Table Brackets - by Front Runner:
• A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Prep Table.
• The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle.
• Easy installation.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
Under-Rack Table Slides Latch - by Front Runner:
• Keeps the Pro Stainless Steel Prep Table securely stored in the Under-Rack Table Brackets - by Front Runner.
• Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place.
• A rubber insert prevents rattling and damage to the table.
• Spring loaded for ease of use.
• Lockable for added security.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.
VIDEOS:
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1425MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1425mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit.
VIDEOS:
EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1345MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!
PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
VIDEOS:
RACK MOUNTED BOTTLE OPENER - BY FRONT RUNNER
• Fit a bottle opener to your rack for wn ever you need to crack open a cool one.
• Black powder coated stainless steel for protection against the elements.
• Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.
Consists of:
• 1x Bracket
• 1x Nut and blot kit
Materials used:
• 2mm (0.08") black powder coated 3CR12 stainless steel
Product Dimensions:
• 49mm (1.9") L x 53mm (2.1") W x 36mm (1.4") H
Weight:
• 96g (3.4oz)
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consisting of:
4 x FASS013 – Foot Set / 60mm-70mm – by Front Runner
1 x RRSTM12 – Slimline II Tray – 1475mm(W) X 2368mm(L) – by Front Runner
2 x TRCA003 – Canopy Tracks / 1150mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
– 2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 2DR Pick Up
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
Consists of:
RRAC067 – Expedition Tubing G (570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1 x Table
1 x Storage Slides
1 x Latch
Table:
Materials used:
Black powder-coated aluminum
3CR12 Stainless steel
Product Dimensions:
1130mm (44.5") L x 550mm (21.7") W x 35mm (1.4") H
Height when opened: 734mm (28.9") H
Weight:
10.03kg (22.1lbs)
Table Slide:
Materials used:
Black powder-coated 3CR12 Stainless Steel
Product Dimensions:
881mm (34.7") L x 187mm (7.4") W x 46mm (1.8") H
Weight:
2.4kg (5.3lbs)
Table Latch:
Materials used:
Black powder-coated 3CR12 Stainless Steel
PVC Grommet
Product Dimensions:
91mm (3.6") L x 51.7mm (2") W x 47mm (1.9") H
Weight:
191g (6.7oz)
Full Kit Dimensions:
1165mm (45.9") L x 642mm (25.3") W x 109mm (4.3") H
Full Kit Weight:
12.6 Kg (27.8lbs)
TABLE CARE:
Keep your table clean and sparkling with these easy care instructions.
Add a small amount of dish soap to a damp soft cloth.
Wipe the table along the grain of your tabletop.
Dry excess moisture with a dry towel.
Quickly add polish by dabbing on a small amount of mineral or
baby oil, wiping with the grain of the stainless steel.
Done!
Consists of:
RRAC068 – Expedition Tubing J (610.5mm and 570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
690mm (27.2") L x 1425mm (56.1") W x 112mm (4.4") H
Weight:
2.84kg (6.3lbs)
Fitment:
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
2x RRAC067 – Expedition Tubing G (570.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1345mm (53") W x 112mm (4.4") H
Weight:
8.26kg (18lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Reviews
There are no reviews yet.