In Stock

Front Runner Load Bar Kit for Land Rover New Defender 90/110 (2020-Current)

$353

Transport gear over the roof of your Land Rover New Defender 90/110 with this low-profile set of Load Bars. This kit allows the use of many Front Runner rack accessories, without the need to install a full roof rack.

SKU: KRLD038 Categories: , , Tags: , , ,

Description

LAND ROVER NEW DEFENDER(2020-CURRENT) 90/110 LOAD BAR KIT – BY FRONT RUNNER

– Compatible with the Land Rover New Defender OEM tracks
– Includes four (4) mounting feet and two (2) 1255mm Load Bars that fit into the factory/OEM vehicle tracks
– Load Bars are mounted via mounting feet that bolt directly onto the tracks
– Uses the same strong, corrosion-free aluminum slats found in Front Runner racks
– Sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats
– Made from steel and durable, weather-resistant black powder coated aluminum
– Includes all hardware, components and installation guide needed to fit Load Bars on a vehicle

KRLD038 – Land Rover New Defender(2020-Current) 90/110 Load Bar Kit
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8″) to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.

If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8″) to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.

If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8″) to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.

INSTALL
Installation Instructions for FASS017
Installation Instructions for WDLB001

Additional information

Consisting of:

2x FASS017 – Foot Set / 75mm-85mm
1x LBSK014 – Roof Load Bar Pair 1255mm(W)
1x RRAC044 – Slat to Load Bar Conversion end Cap Kit
2x RRAC930 – Land Rover New Defender (L663) OEM Track Mount Kit
Material Used:

Black epoxy powder – coated T6 aluminium
Approximate Installed Weight:

6.1kg (13.45lbs)
Shipping Dimensions:

Width: 150mm (6")
Length: 1385mm (55")
Height: 145mm (6")
Shipping Weight:

Weight: 5.89kg (13lbs)

Reviews

There are no reviews yet.

Be the first to review “Front Runner Load Bar Kit for Land Rover New Defender 90/110 (2020-Current)”

Quick Comparison

SettingsFront Runner Load Bar Kit for Land Rover New Defender 90/110 (2020-Current) removeProject Kahn Comfort Leather Interior 360° Tour (Volcanic Red) for Land Rover Defender (2020-Present) removeProject Kahn Comfort Leather Interior 360° Tour (Volcanic Blue) for Land Rover Defender 90 (2020-Present) removeProject Kahn Environment 3: Middle & Lower Interior (Volcanic Orange) for Land Rover Defender 110 (2020-Present) removeProject Kahn Environment 1: Upper, Middle & Lower Interior (Volcanic Orange) for Land Rover Defender 110 (2020-Present) removeProject Kahn 22" RS 3.0 Alloy Wheels for Land Rover Defender (2020-Present) remove
NameFront Runner Load Bar Kit for Land Rover New Defender 90/110 (2020-Current) removeProject Kahn Comfort Leather Interior 360° Tour (Volcanic Red) for Land Rover Defender (2020-Present) removeProject Kahn Comfort Leather Interior 360° Tour (Volcanic Blue) for Land Rover Defender 90 (2020-Present) removeProject Kahn Environment 3: Middle & Lower Interior (Volcanic Orange) for Land Rover Defender 110 (2020-Present) removeProject Kahn Environment 1: Upper, Middle & Lower Interior (Volcanic Orange) for Land Rover Defender 110 (2020-Present) removeProject Kahn 22" RS 3.0 Alloy Wheels for Land Rover Defender (2020-Present) remove
Image
SKUKRLD038360LRDEF110DDLI1360LRDEF90DDLI3LRDEF110E3LRDEF110E1WAK2F9257S1C
Rating
Price$353$6,050$6,050$3,795$4,395$1,750
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionTransport gear over the roof of your Land Rover New Defender 90/110 with this low-profile set of Load Bars. This kit allows the use of many Front Runner rack accessories, without the need to install a full roof rack.Price per Wheel
Content

LAND ROVER NEW DEFENDER(2020-CURRENT) 90/110 LOAD BAR KIT - BY FRONT RUNNER

- Compatible with the Land Rover New Defender OEM tracks - Includes four (4) mounting feet and two (2) 1255mm Load Bars that fit into the factory/OEM vehicle tracks - Load Bars are mounted via mounting feet that bolt directly onto the tracks - Uses the same strong, corrosion-free aluminum slats found in Front Runner racks - Sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats - Made from steel and durable, weather-resistant black powder coated aluminum - Includes all hardware, components and installation guide needed to fit Load Bars on a vehicle KRLD038 - Land Rover New Defender(2020-Current) 90/110 Load Bar Kit The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above. If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters. If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. INSTALL Installation Instructions for FASS017 Installation Instructions for WDLB001

Comfort Leather Interior 360° Tour for Land Rover Defender (2020-Present)

Designed specifically for the new Defender, our latest leather interior is available for 5 and 7 seat variations in a wide range of colours. Complete Interior package selection of colors: Fitting charge: £650 +vat An extensive range of color and material options including Alcantara are available on request at an extra cost. Personalize with: - Environment 1: Upper, Middle and Lower Interior - Environment 2: Upper & Lower Interior. - Environment 3: Middle & Lower Interior

Comfort Leather Interior 360° Tour for Land Rover Defender 90 (2020-Present)

Designed specifically for the new Defender, our latest leather interior is available for 5 and 7 seat variations in a wide range of colors. Complete Interior package selection of colors: An extensive range of color and material options including Alcantara are available on request at an extra cost. Personalize with: - Environment 1: Upper, Middle and Lower Interior - Environment 2: Upper & Lower Interior. - Environment 3: Middle & Lower Interior

LAND ROVER DEFENDER 110 (2020-PRESENT) ENVIRONMENT 3: MIDDLE AND LOWER INTERIOR

Designed specifically for the new Defender. Exchange only - requires donor interior environment parts. An extensive range of color and material options including Alcantara are available on request at an extra cost Finish options: - Volcanic Blue - Volcanic Pink - Volcanic Red - Volcanic Yellow 360 Tours: - Volcanic Orange

LAND ROVER DEFENDER 110 (2020-PRESENT) ENVIRONMENT 1: UPPER, MIDDLE AND LOWER INTERIOR

- Designed specifically for the new Defender. - Exchange only - requires donor interior environment parts. - An extensive range of color and material options including Alcantara are available on request at an extra cost. Finish options: - Volcanic Blue - Volcanic Pink - Volcanic Red - Volcanic Yellow 360 Tour: - Volcanic Orange

LAND ROVER DEFENDER (2020-PRESENT) RS 3.0 ALLOY WHEELS

Suitable for 2020 – present models the new Kahn Land Rover Defender RS 3.0 alloy wheels combine the proud heritage of the Defender with a contemporary approach. Driven by a desire to design a sporting iteration of the highly desirable Defender, Afzal Kahn went back to the drawing board to develop a radical new look that deviates from Land Rover’s traditional styling. Expected in stock Summer 2022. This wheel is designed to accommodate the original Land Rover center cap and wheel nuts/bolts. Personalized with: - Wide Track Bodykit for Land Rover Defender 90 (2020-Present) - Wide Track Bodykit for Land Rover Defender 110 (2020-Present) - Chelsea Truck Company ‘Retro’ Style Hard Spare Wheel Cover - Side Vents - Exposed Carbon Vented Bonnet - Rear Roof Wing - Exposed Carbon Bonnet Side Vents
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Consisting of:

2x FASS017 – Foot Set / 75mm-85mm
1x LBSK014 – Roof Load Bar Pair 1255mm(W)
1x RRAC044 – Slat to Load Bar Conversion end Cap Kit
2x RRAC930 – Land Rover New Defender (L663) OEM Track Mount Kit
Material Used:

Black epoxy powder – coated T6 aluminium
Approximate Installed Weight:

6.1kg (13.45lbs)
Shipping Dimensions:

Width: 150mm (6")
Length: 1385mm (55")
Height: 145mm (6")
Shipping Weight:

Weight: 5.89kg (13lbs)
COLOR:

VOLCANIC RED
PATTERN:

DESIGNO DESIGN
FRONT SEATS:

REUPHOLSTERED IN QUILTED AND PERFORATED DESIGNO DESIGN LEATHER
REAR SEATS:

REUPHOLSTERED IN QUILTED AND PERFORATED DESIGNO DESIGN LEATHER
HEADRESTS:

REUPHOLSTERED IN QUILTED AND PERFORATED LEATHER
FITTING CHARGE:

ADDITIONAL COST, PLEASE ENQUIRE*
VEHICLE FITMENT:

LAND ROVER DEFENDER 90 (2020-PRESENT)
COLOUR:

VOLCANIC BLUE
PATTERN:

DESIGNO DESIGN
FRONT SEATS:

REUPHOLSTERED IN QUILTED AND PERFORATED DESIGNO DESIGN LEATHER
REAR SEATS:

REUPHOLSTERED IN QUILTED AND PERFORATED DESIGNO DESIGN LEATHER
HEADRESTS:

REUPHOLSTERED IN QUILTED AND PERFORATED DESIGNO DESIGN LEATHER
FITTING CHARGE:

ADDITIONAL COST, PLEASE ENQUIRE*
VEHICLE FITMENT:

LAND ROVER DEFENDER 90 (2020-PRESENT)
COLOR:

VOLCANIC ORANGE
FRONT DOOR ARMRESTS:

REUPHOLSTERED IN LEATHER
REAR DOOR ARMRESTS:

REUPHOLSTERED IN LEATHER
STEERING WHEEL:

REUPHOLSTERED IN LEATHER
TRANSMISSION TUNNEL:

REUPHOLSTERED IN LEATHER
LOWER DASHBOARD:

REUPHOLSTERED IN LEATHER
FITTING INCLUDED:

NO
VEHICLE FITMENT:

LAND ROVER DEFENDER 110 (2020-PRESENT)
COLOUR:

VOLCANIC ORANGE
FRONT DOOR TOPS:

REUPHOLSTERED IN LEATHER
REAR DOOR TOPS:

REUPHOLSTERED IN LEATHER
FRONT DOOR ARMRESTS:

REUPHOLSTERED IN LEATHER
REAR DOOR ARMRESTS:

REUPHOLSTERED IN LEATHER
TRANSMISSION TUNNEL:

REUPHOLSTERED IN LEATHER
UPPER DASHBOARD:

REUPHOLSTERED IN LEATHER
FITTING INCLUDED:

NO
VEHICLE FITMENT:

LAND ROVER DEFENDER 110 (2020-PRESENT)
SIZE FRONT WHEEL:

9.5 X 22"
SIZE REAR WHEEL:

9.5 X 22"
COLOR:

SHADOW CHROME
VEHICLE FITMENT:

LAND ROVER DEFENDER (2020-PRESENT)

Related products