Front Runner Drawer Kit for Land Rover New Defender LL663 (2020-Current)
$1,399
Make storing and organizing gear and valuables a no-brainer. This lockable drawer, with fitted deck and faceplates, has been designed specifically for the Land Rover New Defender L663. Hide contents from prying eyes while creating more usable, and easily accessible, storage space in your vehicle. Engineered tough for both on and off-road travel.
LAND ROVER NEW DEFENDER L663 (2020-CURRENT) DRAWER KIT – BY FRONT RUNNER
This drawer kit has 1 lockable drawer, 2 keys per lock, 2 tie down rails, 4 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
• 113kg / 250 lb drawer load carrying capacity.
• Hold open feature: drawer “locks” open while parked on uneven surfaces.
• High-strength bearing slides allow each drawer to extend nearly 100% from the anchored base.
• Provide peace of mind and security by locking away important travel items such as computers, smartphones and camera gear.
• The flat deck incorporates two cargo attachment channels and 4 Tie Down Rings For Drawer System.
• Customize your own storage configurations. Stack and secure luggage, Wolf Pack, Cub Pack aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
• The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
• The side decks and rear decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
• The deck is covered with a durable, UV resistant, nylon pile black carpet detailed to complement the vehicle’s interior contours.
• The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
• Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
• This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicle’s existing mounting points and the drawer mounting brackets. Removing the drawer is just as easy.
All Front Runner Storage Systems are backed by a 2-year warranty.
Additional information
Additional information
Consists of:
1 x Base Drawer unit (SSDR011)
1 x Land Rover Deck Completion Set (1 Left hand side & 1 Right hand side)
1 x Set of Front Covers (1 Left hand side & 1 Right hand side)
1 x Push to close latch with 2 keys
2 x Accessory channels
4 x Eye Nuts for accessory channel
Installation Hardware
Fitting Instruction
Materials used:
Aluminum – Accessory Channels & Sub Frame
Black powder coated steel – Drawer Bins, Frame & Front Covers
Carpet & Laminated plywood – Top Deck, Side & Rear Deck
Product Dimensions:
625mm (24.6") L x 1197mm (47.1") W x 269mm (10.6") H
Weight:
37.3kg (82.2lbs)
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner Drawer Kit for Land Rover New Defender LL663 (2020-Current)” Cancel reply
Make storing and organizing gear and valuables a no-brainer. This lockable drawer, with fitted deck and faceplates, has been designed specifically for the Land Rover New Defender L663. Hide contents from prying eyes while creating more usable, and easily accessible, storage space in your vehicle. Engineered tough for both on and off-road travel.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1165mm wide Front Runner Slimline II Roof Rack.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails around the entire perimeter of a 1255mm wide Front Runner Slimline II Roof Rack.
Replacements for lost or damaged Slimline II assembly components.
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
This lightweight, sturdy prep-sized camp table is ideal for food preparation, food serving, and gathering around to eat. Features include a stainless steel top and black powder-coated aluminum frame. Specifically designed to be easily stored UNDERNEATH most Front Runner Slimline II Roof Racks.*
The Pro Stainless Steel Prep Table Kit includes the Pro Stainless Steel Prep Table, Under-Rack Table Slides and Under-Rack Table Slides Latch.
Content
LAND ROVER NEW DEFENDER L663 (2020-CURRENT) DRAWER KIT - BY FRONT RUNNER
This drawer kit has 1 lockable drawer, 2 keys per lock, 2 tie down rails, 4 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
• 113kg / 250 lb drawer load carrying capacity.
• Hold open feature: drawer “locks” open while parked on uneven surfaces.
• High-strength bearing slides allow each drawer to extend nearly 100% from the anchored base.
• Provide peace of mind and security by locking away important travel items such as computers, smartphones and camera gear.
• The flat deck incorporates two cargo attachment channels and 4 Tie Down Rings For Drawer System.
• Customize your own storage configurations. Stack and secure luggage, Wolf Pack, Cub Pack aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
• The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
• The side decks and rear decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
• The deck is covered with a durable, UV resistant, nylon pile black carpet detailed to complement the vehicle’s interior contours.
• The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
• Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
• This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicle’s existing mounting points and the drawer mounting brackets. Removing the drawer is just as easy.
All Front Runner Storage Systems are backed by a 2-year warranty.
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1165MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1165mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4" to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!
PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
Videos:
EXPEDITION RAIL KIT - FULL PERIMETER - FOR 1255MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1255mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
DID YOU KNOW? This Front Runner Full Perimeter Expedition Rail Kit can be easily converted to a 3/4, half, or 1/4 sized rail kit using included side rail adapter brackets!!
PLEASE NOTE: The side lengths of the Expedition Rails may need to be trimmed to fit the specific length of your rack or for the custom configuration of your choosing. A simple hacksaw can be used to make the cuts. See the fitment guide in the INSTALLATION TAB for more information.
VIDEOS:
4 PIECE TOOL KIT - BY FRONT RUNNER
The Front Runner 4 piece tool kit is all you need for moving around rack accessories, reconfiguring Slimline II Roof Rack slats, and general Front Runner accessory adjustments. This high quality kit is compact and can be stored within easy reach.
Includes the following:
• 1 x 5mm Ball type Hex Key
• 1 x 4mm Ball type Hex Key
• 1 x 10mm Ratchet Wrench Tool
• 1 x 13mm Ratchet Wrench Tool
VIDEOS:
1345MM SLAT ADD-ON KIT - BY FRONT RUNNER
• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
• Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
• This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
• Can also be used to build a custom Load Bar Kit, or as a replacement slat.
• Features T-slots on both the top and bottom faces.
• A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
• Made from the same black powder coated aluminum as all Front Runner Racks.
NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately.
VIDEOS:
PRO STAINLESS STEEL PREP TABLE KIT - BY FRONT RUNNER
A complete prep table and table storing solution. Effortlessly take a previously cumbersome luxury item on any vehicle based adventure.
Pro Stainless Steel Prep Table - by Front Runner:
• The extruded aluminum frame nests into the storage brackets and is secured with the table latch eliminating any excessive noise.
• A durable stainless steel table top ensures a hygienic surface for the preparation and serving of meals.
• The table frame and legs are powder-coated black with the same durable, corrosion resistant coating as the Front Runner Slimline II Roof Rack.
• The Legs easily unfold and with the open-and-lock mechanism are kept firmly in place.
• Rounded glass filled nylon corners prevent any accidental knicks or damage and provide a grip point when removing the table from under your roof rack.
Under-Rack Table Brackets - by Front Runner:
• A no-noise and secure storage solution designed specifically for the Pro Stainless Steel Prep Table.
• The brackets can be mounted both parallel and perpendicular to the roof rack's slats giving the options to access to the table from the side or rear of the vehicle.
• Easy installation.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
Under-Rack Table Slides Latch - by Front Runner:
• Keeps the Pro Stainless Steel Prep Table securely stored in the Under-Rack Table Brackets - by Front Runner.
• Secured to the top of the Slimline II roof rack using the T-slot and clamps over the lip of the table to keep it in place.
• A rubber insert prevents rattling and damage to the table.
• Spring loaded for ease of use.
• Lockable for added security.
• Made of 3CR12 stainless steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner Slimline II roof rack.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Base Drawer unit (SSDR011)
1 x Land Rover Deck Completion Set (1 Left hand side & 1 Right hand side)
1 x Set of Front Covers (1 Left hand side & 1 Right hand side)
1 x Push to close latch with 2 keys
2 x Accessory channels
4 x Eye Nuts for accessory channel
Installation Hardware
Fitting Instruction
Materials used:
Aluminum – Accessory Channels & Sub Frame
Black powder coated steel – Drawer Bins, Frame & Front Covers
Carpet & Laminated plywood – Top Deck, Side & Rear Deck
Product Dimensions:
625mm (24.6") L x 1197mm (47.1") W x 269mm (10.6") H
Weight:
37.3kg (82.2lbs)
Consists of:
2x RRAC065 – Expedition Tubing A (480.5mm & 365.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1165mm (45.9") W x 112mm (4.4") H
Weight:
7.5kg (16.5lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 110 4DR Pick Up
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
2x RRAC066 – Expedition Tubing D (525.5mm and 365.5mm)
2x RRAC071 – Expedition Rail Corner Set
2x RRAC072 – Expedition Rail LH & RH Drop Set
3x RRAC073 – Expedition Rail Joiner
1x KRXX001 – Expedition Rail Middle Kit
Min: 752mm (29.6") – Max: 2772mm (109.1") L x 1255mm (49.4") W x 112mm (4.4") H
Weight:
7.62kg (16.8lbs)
Fitment:
– 2021 Land Rover Defender 90 L663 5 Door
– 2021 Land Rover Defender 110 L663 5 Door
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 110 4DR Pick Up
– 2019-2020 Land Rover Defender 110 5dr Station Wagon
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019-2020 Land Rover Defender 130 4DR Pick Up
– 2019-2020 Land Rover Defender 90
– 2019-2020 Land Rover Defender 90 2DR Pick Up
– 2019-2020 Land Rover Defender 90 3DR Station Wagon
– 2015-2016 Land Rover Defender 110
– 2015-2016 Land Rover Defender 130
– 2015-2016 Land Rover Defender 130 2.2
– 2015-2016 Land Rover Defender 130 4DR Pick Up
– 2015-2016 Land Rover Defender 90
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2015-2016 Land Rover Defender 90 3DR Station Wagon
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 110 4DR Pick Up
– 2014-2016 Land Rover Defender 110 5DR Station Wagon
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1 x 5mm Ball End Hex Key
1 x 4mm Ball End Hex Key
1 x 10mm Ratchet Wrench
1 x 13mm Ratchet Wrench
Materials used:
Chrome Vanadium
Tool Steel
Product Dimensions:
150mm (5.9")L x 100mm (3.9")W x 25mm (1.0")H
Weight:
183g (6.5oz)
Consisting of:
1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1345 – Standard Slat- 1345mm Wide Rack
Approximate Installed Weight 2kg (4lbs)
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1 x Table
1 x Storage Slides
1 x Latch
Table:
Materials used:
Black powder-coated aluminum
3CR12 Stainless steel
Product Dimensions:
1130mm (44.5") L x 550mm (21.7") W x 35mm (1.4") H
Height when opened: 734mm (28.9") H
Weight:
10.03kg (22.1lbs)
Table Slide:
Materials used:
Black powder-coated 3CR12 Stainless Steel
Product Dimensions:
881mm (34.7") L x 187mm (7.4") W x 46mm (1.8") H
Weight:
2.4kg (5.3lbs)
Table Latch:
Materials used:
Black powder-coated 3CR12 Stainless Steel
PVC Grommet
Product Dimensions:
91mm (3.6") L x 51.7mm (2") W x 47mm (1.9") H
Weight:
191g (6.7oz)
Full Kit Dimensions:
1165mm (45.9") L x 642mm (25.3") W x 109mm (4.3") H
Full Kit Weight:
12.6 Kg (27.8lbs)
TABLE CARE:
Keep your table clean and sparkling with these easy care instructions.
Add a small amount of dish soap to a damp soft cloth.
Wipe the table along the grain of your tabletop.
Dry excess moisture with a dry towel.
Quickly add polish by dabbing on a small amount of mineral or
baby oil, wiping with the grain of the stainless steel.
Reviews
There are no reviews yet.