The AdventureTemp Flask’s rugged and corrosive resistant stainless steel construction keeps your drink icy cold, or steaming hot, for hours. Perfectly sized for most vehicle cupholders for worry-free driving. A stainless steel handle allows for easy clipping to a backpack or other gear.
Stay out longer with the double-walled and vacuumed insulated AdventureTemp Flask / Black. The rugged puncture-resistant build, o-ring seal and screw-on top is ready for the most bone-rattling terrain, giving you the freedom to choose your own adventure.
• Tough double-walled stainless steel construction with a durable black powder coated finish
• Vacuumed insulation keeps cold drinks cold, and hot drinks hot, for hours
• Holds 20oz / 600ml of your favorite beverage
• High-quality 18/8 stainless steel for durability and longevity
• Corrosion-resistant
• Puncture resistant
• Leak-proof stainless steel and bamboo top with alloy handle and o-ring seal
• Fits most vehicle cupholders
• Safe Food Grade stainless steel
• Easy to carry by hand, backpack, or other gear
• Wide mouth for easy filling, drinking and cleaning
• Naturally BPA free
Care:
Rinse and wash before using.
1. Clean with warm water and mild dish soap. Rinse thoroughly with hot water.
2. DO NOT clean your flask in the dishwasher.
3. To remove difficult stains, fill your flask with hot water, add one teaspoon of baking soda. DO NOT put stopper/top on the flask while using this cleaning method. Don’t be a science fair failure.
4. Use a soft cloth. Avoid using scrubbing/scouring products. They will scratch your nice, new flask.
FOR THE BEST TEMP KEEPING RESULTS: pre-fill the flask for 3 minutes with hot water for hot drinks, or cold water for chilled drinks. Get that flask to temp so your drinks don’t have to!
Additional information
Additional information
Consists of:
1 x Double-Wall Stainless Steel Vacuum Flask
Materials used:
18/8 Black powder coated stainless steel
Bamboo topper on stainless steel cap
Silicone lid gasket
Product Dimensions:
Height without cap: 235mm (9.25")
Height with cap: 257mm (10.13")
Diameter: 73mm (2.88")
Capacity:
600ml (20oz)
Weight:
400g (14.1oz)
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “Front Runner AdventureTemp Flask Black” Cancel reply
The AdventureTemp Flask’s rugged and corrosive resistant stainless steel construction keeps your drink icy cold, or steaming hot, for hours. Perfectly sized for most vehicle cupholders for worry-free driving. A stainless steel handle allows for easy clipping to a backpack or other gear.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1165mm wide Front Runner Slimline II Roof Rack.
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to fit rails to either the front or back of a 1345mm wide Front Runner Slimline II Roof Rack.
This rubber beading fits into your Front Runner Roof Rack t-slots to create a perfect rattle free and non-slip surface. Sold in 1.5m/5' lengths.
This Mounting System enables you to mount the Front Runner 67L Water Tank - Universal to one of our Drawer Systems or any other flat surface.
Convert any size slat to a load bar with these plastic end caps.
Content
ADVENTURETEMP FLASK / BLACK - BY FRONT RUNNER
Stay out longer with the double-walled and vacuumed insulated AdventureTemp Flask / Black. The rugged puncture-resistant build, o-ring seal and screw-on top is ready for the most bone-rattling terrain, giving you the freedom to choose your own adventure.
• Tough double-walled stainless steel construction with a durable black powder coated finish
• Vacuumed insulation keeps cold drinks cold, and hot drinks hot, for hours
• Holds 20oz / 600ml of your favorite beverage
• High-quality 18/8 stainless steel for durability and longevity
• Corrosion-resistant
• Puncture resistant
• Leak-proof stainless steel and bamboo top with alloy handle and o-ring seal
• Fits most vehicle cupholders
• Safe Food Grade stainless steel
• Easy to carry by hand, backpack, or other gear
• Wide mouth for easy filling, drinking and cleaning
• Naturally BPA free
Care:
Rinse and wash before using.
1. Clean with warm water and mild dish soap. Rinse thoroughly with hot water.
2. DO NOT clean your flask in the dishwasher.
3. To remove difficult stains, fill your flask with hot water, add one teaspoon of baking soda. DO NOT put stopper/top on the flask while using this cleaning method. Don’t be a science fair failure.
4. Use a soft cloth. Avoid using scrubbing/scouring products. They will scratch your nice, new flask.
FOR THE BEST TEMP KEEPING RESULTS: pre-fill the flask for 3 minutes with hot water for hot drinks, or cold water for chilled drinks. Get that flask to temp so your drinks don’t have to!
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1165MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
Please note: this kit only works with 1165mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
Videos:
EXPEDITION RAIL KIT - FRONT OR BACK - FOR 1345MM(W) RACK - BY FRONT RUNNER
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack. Please note: this kit only works with 1345mm wide Front Runner Slimline II Roof Racks.
• Install in minutes.
• No drilling required.
• Adds extra cargo support.
• Attractive, low profile design.
• Mounting hardware included.
• Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
• Manufactured with corrosion resistant, high-density aluminum components.
• The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit.
VIDEOS:
T-SLOT RUBBER BEADING - BY FRONT RUNNER
Need a little extra insulation between your rack and gear?
The Front Runner T-Slot Rubber Beading slides easily into your Front Runner rack t-slots for extra grip and cushioning. It reduces rattles and is great for storage boxes, firewood, or any other item that you want to insulate from your rack. Comes in 1.5m (5') lengths.
On some vehicles with sun roofs, installing the t-slot beading on the front slats may help lessen wind noise.
VIDEOS:
Water Tank 67L/17.7Gal Drawer System Mounting Kit - BY FRONT RUNNER
This Mounting System enables you to mount the Front Runner Universal Water Tank - 67l / 17.7gal to your Front Runner Slimline II roof rack as well as any other flat surface.
SLAT TO LOAD BAR CONVERSION END CAP KIT - BY FRONT RUNNER
• Convert any size slat to a load bar with these plastic end caps.
• Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
• Just pop them on and your slat to load bar "conversion" is complete!
• Supplied in sets of (4) four.
Consists of:
• 4x Load Bar End-caps
Material used:
• Plastic - Polypropylene
Product Dimensions:
• 91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
• 80g (2.8oz)
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Double-Wall Stainless Steel Vacuum Flask
Materials used:
18/8 Black powder coated stainless steel
Bamboo topper on stainless steel cap
Silicone lid gasket
Product Dimensions:
Height without cap: 235mm (9.25")
Height with cap: 257mm (10.13")
Diameter: 73mm (2.88")
Capacity:
600ml (20oz)
Weight:
400g (14.1oz)
Consists of:
RRAC065 – Expedition Tubing A (480.5mm & 365.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
485mm (19.1") L x 1165mm (45.9") W x 112mm (4.4") H
Weight:
2.36kg (5.2lbs)
Fitment:
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 110 4DR Pick Up
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
RRAC067 – Expedition Tubing G (570.5mm)
RRAC071 – Expedition Rail Corner Set
RRAC072 – Expedition Rail LH & RH Drop Set
RRAC073 – Expedition Rail Joiner
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015-2016 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Consists of:
1.5m (5') Length of beading
Materials used:
Ethylene propylene diene monomer (M-class) all weather rubber
Reviews
There are no reviews yet.