| Content | Clutch Pedal Assist Kit -45% Lighter
Do you have a heavy Defender clutch pedal?
A revolutionary Power Clutch Pedal Assist Spring Kit fits the Land Rover Defender 300TDI, and TD5, along with Discovery 2 Td5 models. Much stronger and lighter than the Land Rover Over Center Spring, fitting this kit will reduce the effort required for pressing the clutch pedal.
Advantages
45% lighter pedal feel than OEM “Pedal assist spring”
80% lighter pedal than with no spring at all! (When retro fitted to TD5/ 300TDI)
Will the Clutch Power Spring fit my DEFENDER?
Look at your clutch pedal:
- If the clutch pedal arm is a flat profile – IT FITS!
- If the clutch pedal arm is a ‘U’ shaped profile, unfortunately it wont fit, but there is a solution! Simply remove the older 200TDI style pedal box (6 bolts in the footwell) and refit with the later style pedal box.
Optimill, making your Land Rover better! | Optimill Number Plate Light for Defender
- Defender Number Plate Light.
- Billet machined from 6082 aluminium.
- Comes with LED number plate light.
- Plug & Play to plug into factory Land Rover wiring loom.
- Fitted using the existing holes in the body.
- Supplied with foam gasket and stainless steel screws.
- Fits all Defender models.
PLEASE NOTE:
We recommend that no TFR (Traffic Film Remover) solutions found in some cleaning products, should be used on our anodised products. | Optimill Wheel Spacers 30mm Raw for Defender
- Optimill wheel spacers.
- 30mm hub centric wheel spacers manufactured from billet aluminum.
- Fits all Land Rover Defender models.
- Comes as a set of 4 with OEM Land Rover studs pressed into the back.
- Spacers are used to give a wider stance and to give the vehicle more lock when wider wheels have been fitted, as the tyres rub and need more clearance. | Optimill Defender Door Hinge Security Kit
- This Kit Fits on the Inside of your doors, to prevent the doors been pulled off when the captive bolts are removed from the bulkhead side of the door hinges.
- These plates are easy to install 20/30 minutes. The upper guard has been notched so that it fits neatly around the dash padding. The lower and rear hinges are profiled for a perfect fit across all variants.
- Manufactured from 2mm Stainless Steel 304.
Fits all defender models
1) kit required for a 90
2) kits required for a 110 | Optimill Mirror Arm Looms with Plugs for Defender
Optimill Heated Mirror Arm Looms for Land Rover Defender
Here at Optimill, we have been working closely with Land Rover wiring experts to overcome the problem of wiring puddle lights/heated mirrors into the Defender wiring system.
These are specifically designed to wire up the puddle lights and heated mirrors into the Land Rover factory wiring. The loom means the puddle lights come on and off with opening/closing the door and when the vehicle is locked/unlocked.
This version has pre-wired plugs on the loom to connect to the mirror arm wire once they are fitted through the door, the female plug is also supplied to crimp onto the mirror side of the wire once assembled.
Also available: MUD Heated Mirror Pads to fit into your existing mirrors. | Billet Wing Mirror Arms with Puddle Light for Land Rover Defender.
Manufactured here at Optimill from aerospace grade billet aluminum, anodized and assembled in house in the UK to our strict quality control.
Comes pre-wired for heated mirror heads and fitted puddle lights.
Manufactured to fit both Optimill and original door hinges. The hinges may require drilling to hide the wires into the door. (Optimill hinges now come pre-drilled to accompany this modification).
All fixings and drilling templates are supplied for ease of fitting.
These mirror arms are 20mm longer to aid towing trailers/caravans.
In addition please see our mirror arm looms, which compliment our mirror arms, these are specifically designed to wire up the puddle lights and heated mirrors into the Land Rover wiring. The loom means the puddle lights come on and off with opening/closing the door and when the vehicle is locked/unlocked.
Also available: MUD Heated Mirror Pads to fit into your existing mirrors.
Fit all Defender models
- Sold as a pair
PLEASE NOTE: We recommend that no TFR solutions should be used on our products where anodized. |
Reviews
There are no reviews yet.