Finally, a solid, quality built carb complaint Jerry Can that’s off-road tough and looks great too. Includes a carb compliant spout and diesel adapter spout. Features a full internal breather pipe for splash-proof pouring. Interior coated with Rezol lining to prevent rusting.
• Fully paint-coated inside and outside.
• Have a full, internal breather pipe for splash-proof pouring.
• The highest quality Jerry can out there.
• Original Mil Spec.
• DOT, EPA and CARB approved.
• Comes with a safety spout attached and also has an adapter for vehicles with smaller filler receivers.
• Manufactured from 0.9mm Cold Rolled Steel (DC 04 EN 10130).
• Dual pan construction.
• Unique wide channel breather for better smoother pouring.
• Seam welded for extra strength.
• Three Handle Configuration.
• Leak-proof Bayonet Closure.
• Locking pin in cap.
• Strengthened hinge on cap to prevent accidental bending when closing.
• Cap designed to hold open when discharging the can.
• Lined inside with fuel resistant Rezol enamel to prevent rusting.
• Painted exterior epoxypolyester powder coat.
• Manufactured and tested to comply with the following standards: DOT, EPA, C.A.R.B., DIN 7274 and BAM – GGR001. Australian Standard – AS 2906. German Standard–TUV/GS. Swedish Standard-SP. UN–Dangerous goods approval.
Additional information
Additional information
Consists of:
1 x Jerry Can
1 x Carb Compliant Spout
Materials used:
0.9mm Cold Rolled Steel (DC 04 EN 10130)
Product Dimensions:
165.1mm (6.5") L x 342.9 (13.5") W x 469.9mm (18.5) H
Weight:
5.44kg (12lbs)
Reviews (0)
Reviews
There are no reviews yet.
Be the first to review “20L Black Jerry Can w/ Spout & Adapter” Cancel reply
Finally, a solid, quality built carb complaint Jerry Can that’s off-road tough and looks great too. Includes a carb compliant spout and diesel adapter spout. Features a full internal breather pipe for splash-proof pouring. Interior coated with Rezol lining to prevent rusting.
This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender Pickup contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
The name says it all. Turn your entire vehicle into a handy way to open your beers.
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
So you're adding slats onto your roof rack? Use these additional tray slat bolts to fasten them to your Slimline II roof rack. Sold in pairs.
These adaptor plates give you the ability to attach a Thule slotted Load Bar or Aero Bar and Thule Accessories to a Front Runner Roof Rack. These plates can also be used to mount a Front Runner Slimline II Roof Rack Tray to Thule slotted Load Bars.
Content
20L BLACK JERRY CAN W/ SPOUT AND ADAPTER
• Fully paint-coated inside and outside.
• Have a full, internal breather pipe for splash-proof pouring.
• The highest quality Jerry can out there.
• Original Mil Spec.
• DOT, EPA and CARB approved.
• Comes with a safety spout attached and also has an adapter for vehicles with smaller filler receivers.
• Manufactured from 0.9mm Cold Rolled Steel (DC 04 EN 10130).
• Dual pan construction.
• Unique wide channel breather for better smoother pouring.
• Seam welded for extra strength.
• Three Handle Configuration.
• Leak-proof Bayonet Closure.
• Locking pin in cap.
• Strengthened hinge on cap to prevent accidental bending when closing.
• Cap designed to hold open when discharging the can.
• Lined inside with fuel resistant Rezol enamel to prevent rusting.
• Painted exterior epoxypolyester powder coat.
• Manufactured and tested to comply with the following standards: DOT, EPA, C.A.R.B., DIN 7274 and BAM – GGR001. Australian Standard – AS 2906. German Standard–TUV/GS. Swedish Standard-SP. UN–Dangerous goods approval.
LAND ROVER DEFENDER (1983-2016) PICKUP TRUCK SLIMLINE II ROOF RACK KIT - BY FRONT RUNNER
• This 752mm/29.6" long full-size Slimline II cargo carrying roof rack kit for the Land Rover Defender Pickup contains Slimline II Tray and Wind Deflector, as well as 4 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• All Front Runner Racks are backed by a Limited Lifetime Warranty*
Videos:
RACK MOUNTED BOTTLE OPENER - BY FRONT RUNNER
• Fit a bottle opener to your rack for wn ever you need to crack open a cool one.
• Black powder coated stainless steel for protection against the elements.
• Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.
Consists of:
• 1x Bracket
• 1x Nut and blot kit
Materials used:
• 2mm (0.08") black powder coated 3CR12 stainless steel
Product Dimensions:
• 49mm (1.9") L x 53mm (2.1") W x 36mm (1.4") H
Weight:
• 96g (3.4oz)
VIDEOS:
1475MM SLAT ADD-ON KIT - BY FRONT RUNNER
• Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
• Includes Additional Tray Slat Bolts secure extra slat to your Slimline II Rack Tray.
• This slat will work with any Front Runner Slimline II Rack that is 1475mm wide.
• Can also be used to build a custom Load Bar Kit, or as a replacement slat.
• Features T-slots on both the top and bottom faces.
• A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
• Made from the same black powder coated aluminum as all Front Runner Racks.
NOTE: Slat to Load Bar Conversion end Cap Kit for a Slat to Load Bar conversion are not included and sold separately.
VIDEOS:
ADDITIONAL TRAY SLAT BOLTS - BY FRONT RUNNER
- So you're adding slats onto your rack? Use these additional tray slat bolts to fasten them. Sold in pairs.
Consists of:
• 2x M8x25 Button Heads
VIDEOS:
RACK ADAPTOR PLATES FOR THULE SLOTTED LOAD BARS - BY FRONT RUNNER
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
If you currently own Thule Load Bars on your vehicle, you can also use these adapter plates to mount a Front Runner Slimline II Roof Rack Tray to your load bars.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
• 3CR12 stainless steel.
• Black powder coated.
• Mounts onto individual slats via the T-slot system.
• T-slot bolts included.
• Pre-cut fitment holes.
VIDEOS:
Weight
Dimensions
N/A
N/A
N/A
N/A
N/A
N/A
Additional information
Consists of:
1 x Jerry Can
1 x Carb Compliant Spout
Materials used:
0.9mm Cold Rolled Steel (DC 04 EN 10130)
Product Dimensions:
165.1mm (6.5") L x 342.9 (13.5") W x 469.9mm (18.5) H
Weight:
5.44kg (12lbs)
Consisting of:
2 x LASS104 – No 4 Leg 170mm (Pair) – by Front Runner
1 x RRSTJ04 – Slimline II Tray – 1425mm(W) X 752mm(L) – by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
3CR12 Stainless Steel
Approximate Installed Weight 19kg (41lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
– 2019-2020 Land Rover Defender 110 2DR Pick Up
– 2019-2020 Land Rover Defender 130 2DR Pick Up
– 2019 Land Rover Defender 90 2dr Pick-Up
– 2015-2016 Land Rover Defender 90 2DR Pick Up
– 2014-2016 Land Rover Defender 110 2DR Pick Up
– 2014-2016 Land Rover Defender 130 2DR Pick Up
Consisting of:
1 x RRAC045 – Additional Tray Slat Bolts
1 x RRSS1475 – Standard Slat- 1475mm Wide Rack
Approximate Installed Weight 2kg (5lbs)
2021 Land Rover Defender 90 L663 5 Door
2021 Land Rover Defender 110 L663 5 Door
2019-2020 Land Rover Defender 110 2DR Pick Up
2019-2020 Land Rover Defender 110 4DR Pick Up
2019-2020 Land Rover Defender 110 5dr Station Wagon
2019-2020 Land Rover Defender 130 2DR Pick Up
2019-2020 Land Rover Defender 130 4DR Pick Up
2019-2020 Land Rover Defender 90
2019-2020 Land Rover Defender 90 2DR Pick Up
2019-2020 Land Rover Defender 90 3DR Station Wagon
2016 Land Rover Defender 90 3DR Station Wagon
2015-2016 Land Rover Defender 110
2015-2016 Land Rover Defender 130
2015-2016 Land Rover Defender 130 2.2
2015-2016 Land Rover Defender 130 4DR Pick Up
2015-2016 Land Rover Defender 90
2015-2016 Land Rover Defender 90 2DR Pick Up
2015 Land Rover Defender 90 3DR Station Wagon
2014-2016 Land Rover Defender 110 2DR Pick Up
2014-2016 Land Rover Defender 110 4DR Pick Up
2014-2016 Land Rover Defender 110 5DR Station Wagon
2014-2016 Land Rover Defender 130 2DR Pick Up
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") 3CR12 stainless steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 285mm (11.22") x W 205mm (8.07") x H 55mm (2.16")
Reviews
There are no reviews yet.